Search

Search provisions, jump to a law or an article

1 article

Article 192Inspection

第百九十二条(点検)

When having assembled a pile driver, pile drawer or boring machine, the employer must inspect the following matters, and not allow the use of the machines unless having confirmed that there are no abnormalities:

事業者は、くい打機、くい抜機又はボーリングマシンを組み立てたときは、次の事項について点検し、異常がないことを確認してからでなければ、これを使用させてはならない。

damage and slackness of joint parts of the machine;

機体の緊結部のゆるみ及び損傷の有無

fitted state of the hoisting wire rope, sheave, and pulley block;

巻上げ用ワイヤロープ、みぞ車及び滑車装置の取付状態

functions of the brake and ratchets of hoisting device;

巻上げ装置のブレーキ及び歯止め装置の機能

installation status of a winch; and

ウインチの据付状態

for a pile driver or a pile drawer of which the top part is secured with stays, the method of fixing the stays and the firmness of the stays.

控えで頂部を安定させるくい打機又はくい抜機にあつては、控えのとり方及び固定の状態

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy