When carrying out a rotating test of a high-speed rotor (meaning a rotating body such as a turbine rotor or the basket of a centrifugal separator, which has a circumferential speed exceeding 25 m/sec.; hereinafter the same applies in this Section), the employer must carry out the test inside a purpose-built sound building or at a place isolated by sound barriers, etc., in order to prevent dangers due to the destruction of the high-speed rotor; provided, however, that this does not apply when a rotating test of a high-speed rotor other than the high-speed rotor set forth in the following Article is carried out, and measures such as providing a sound cover in the testing facilities for preventing dangers due to destruction of the high-speed rotor have been taken.
事業者は、高速回転体(タービンローター、遠心分離機のバスケツト等の回転体で、周速度が毎秒二十五メートルをこえるものをいう。以下この節において同じ。)の回転試験を行なうときは、高速回転体の破壊による危険を防止するため、専用の堅固な建設物内又は堅固な障壁等で隔離された場所で行なわなければならない。ただし、次条の高速回転体以外の高速回転体の回転試験を行なう場合において、試験設備に堅固な覆いを設ける等当該高速回転体の破壊による危険を防止するための措置を講じたときは、この限りでない。
Read this with the articles around it
high-speed rotormachine translation
「高速回転体」
In this Section, a rotating body, such as a turbine rotor or the basket of a centrifuge, whose peripheral speed exceeds 25 metres a second.
Defined inArticle 149, paragraph (1)· applies only in this section