When carrying out rope access work, the employer must, before commencing the work for the day, inspect the condition of the main rope, etc., fall arrest equipment with the required performance and safety helmets, and, when having found any abnormality, immediately repair or replace them.
事業者は、ロープ高所作業を行うときは、その日の作業を開始する前に、メインロープ等、要求性能墜落制止用器具及び保護帽の状態について点検し、異常を認めたときは、直ちに、補修し、又は取り替えなければならない。
Read this with the articles around it
rope access workmachine translation
「ロープ高所作業」
Work at a height of 2 metres or more where a working floor is hard to set up, done by a worker who holds their body on a device they raise and lower themselves, hung from a rope tied to a support above, other than work on a slope of less than 40 degrees.
Short name set inArticle 36, paragraph (1), item (xl)
fall arrest equipment with the required performancemachine translation
「要求性能墜落制止用器具」
Fall arrest equipment (墜落制止用器具) with the performance that the risk of falling calls for.
Short name set inArticle 130-5, paragraph (1)
main rope, etc.machine translation
「メインロープ等」
The main rope and lifeline used in rope access work, the fastenings that tie them to their supports, the body-holding device and the connectors that attach it to the main rope (in Article 539-5, paragraph (2), item (iv) and Article 539-9).
Short name set inArticle 539-3, paragraph (1)· applies only in this provision and in Article 539-5, paragraph (2), item (iv); and Article 539-9