Search

Search provisions, jump to a law or an article

1 article

Article 413Traveling Route of Transporting Machines

第四百十三条(運搬機械等の運行の経路等)

When carrying out quarrying work, the employer must determine in advance the traveling route of transporting machines, etc., and machines for breaking rocks into small pieces, and the method of entering and leaving from the loading and unloading site of earth and rocks of those machines, and make the traveling route and the method known to the workers concerned.

事業者は、採石作業を行なうときは、あらかじめ、運搬機械等及び小割機械の運行の経路並びに運搬機械等及び小割機械の土石の積卸し場所への出入の方法を定めて、これを関係労働者に周知させなければならない。

As regards the traveling route set forth in the preceding paragraph, the employer must take the following measures:

事業者は、前項の運行の経路については、次の措置を講じなければならない。

to maintain a sufficient width;

必要な幅員を保持すること。

to prevent collapse of shoulders;

路肩の崩壊を防止すること。

to prevent the ground from weakening; and

地盤の軟弱化を防止すること。

to provide signs or a railing at necessary places.

必要な箇所に標識又はさくを設けること。

When carrying out repairs or other work for effectively maintaining the operation route set forth in paragraph (1), the employer must place a watcher or display a notice indicating that the work is under way.

事業者は、第一項の運行の経路について補修その他経路を有効に保持するための作業を行なうときは、監視人を配置し、又は作業中である旨の掲示をしなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy