Search

Search provisions, jump to a law or an article

1 article

Article 389-3Measures to Prevent Fire in Carrying Out Work of Gas Welding

第三百八十九条の三(ガス溶接等の作業を行う場合の火災防止措置)

In carrying out the construction work of tunnels, etc., when the work of welding, cutting or heating metals using the flammable gas and oxygen is carried out inside the tunnels, etc., the employer must take the following measures to prevent fire:

事業者は、ずい道等の建設の作業を行う場合において、当該ずい道等の内部で、可燃性ガス及び酸素を用いて金属の溶接、溶断又は加熱の作業を行うときは、火災を防止するため、次の措置を講じなければならない。

to remove rags, wood chips, paper scraps or other flammable objects lying around inside, cover them with nonflammable objects, or install partitions to prevent sparks arising from the work;

付近にあるぼろ、木くず、紙くずその他の可燃性の物を除去し、又は当該可燃性の物に不燃性の物による覆いをし、若しくは当該作業に伴う火花等の飛散を防止するための隔壁を設けること。

to have the supervisor set forth in Article 257 carry out the following matters in addition to matters set forth in each item of the same Article:

第二百五十七条の指揮者に、同条各号の事項のほか、次の事項を行わせること。

to inform to the workers engaging in the work the location of fire extinguishing equipment and the method of using the equipment;

作業に従事する労働者に対し、消火設備の設置場所及びその使用方法を周知させること。

to monitor the work process and immediately take necessary measure when having found any abnormality; and

作業の状況を監視し、異常を認めたときは、直ちに必要な措置をとること。

to confirm that there is no risk of fire due to sparks, etc., after the work is completed.

作業終了後火花等による火災が生ずるおそれのないことを確認すること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy