Search

Search provisions, jump to a law or an article

1 article

Article 345Work in Proximity to Extra High Voltage Live Lines

第三百四十五条(特別高圧活線近接作業)

In carrying out electric work such as inspecting, repairing, painting and cleaning an electric circuit or its supports (excluding supporting insulators for extra high voltage charged circuits), and when there is a risk of causing danger of electric shock to the worker engaging in the work due to coming in vicinity of an extra high voltage charged circuit, the employer must take measures that fall under any of the following items:

事業者は、電路又はその支持物(特別高圧の充電電路の支持がいしを除く。)の点検、修理、塗装、清掃等の電気工事の作業を行なう場合において、当該作業に従事する労働者が特別高圧の充電電路に接近することにより感電の危険が生ずるおそれのあるときは、次の各号のいずれかに該当する措置を講じなければならない。

to have the worker use live line work equipment; or

労働者に活線作業用装置を使用させること。

to have body, etc., keep the approach limit distance to the charged circuit as prescribed in paragraph (1), item (i) of the preceding Article. In this case, to provide a sign, etc., at a readily visible location where the approach limit distance may be maintained, or to place a watcher and have the watcher watch the work.

身体等について、前条第一項第一号に定める充電電路に対する接近限界距離を保たせなければならないこと。この場合には、当該充電電路に対する接近限界距離を保つ見やすい箇所に標識等を設け、又は監視人を置き作業を監視させること。

A worker, when having been instructed to use live line work equipment by the employer in carrying out the work set forth in the preceding paragraph, must use it.

労働者は、前項の作業において、活線作業用装置の使用を事業者から命じられたときは、これを使用しなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy