Search

Search provisions, jump to a law or an article

1 article

Article 340Opening the Circuit of Disconnectors

第三百四十条(断路器等の開路)

When opening a switch such as a disconnector and line switch for high voltage or extra-high voltage electrical circuit that is not for breaking the load current, the employer must have the workers engaged in the operation confirm that the electric circuit is at no load using a pilot lamp for indicating that the electric circuit is at no load, a tablet for identifying the electrical circuit, etc.; provided, however, that this does not apply when a locking device is provided for the switch that does not allow the circuit to open unless the electrical circuit is at no load.

事業者は、高圧又は特別高圧の電路の断路器、線路開閉器等の開閉器で、負荷電流をしや断するためのものでないものを開路するときは、当該開閉器の誤操作を防止するため、当該電路が無負荷であることを示すためのパイロツトランプ、当該電路の系統を判別するためのタブレツト等により、当該操作を行なう労働者に当該電路が無負荷であることを確認させなければならない。ただし、当該開閉器に、当該電路が無負荷でなければ開路することができない緊錠装置を設けるときは、この限りでない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy