Search

Search provisions, jump to a law or an article

1 article

Article 328-2Work Standards for Filling Tires with Air

第三百二十八条の二(タイヤの空気充てん作業の基準)

When assembling a tire for an automobile (excluding two-wheeled vehicles) (hereinafter referred to as "tires" in this Article) and filling a tire with air using an air compressor, the employer must have the worker engaging in the work adjust air pressure appropriately in accordance with the type of tire in order to prevent danger due to a burst tire, etc., and use appliances such as safety enclosures etc., in order to prevent pieces of burst tires, etc., from coming flying.

事業者は、自動車(二輪自動車を除く。)用タイヤ(以下この条において「タイヤ」という。)の組立てを行う場合において、空気圧縮機を用いてタイヤに空気を充てんする作業を行うときは、タイヤの破裂等による危険を防止するため、当該作業に従事する労働者に、タイヤの種類に応じて空気の圧力を適正に調節させ、及び安全囲い等破裂したタイヤ等の飛来を防止するための器具を使用させなければならない。

The worker engaging in the work set forth the preceding paragraph must adjust air pressure appropriately corresponding to the type of tire and use the appliances set forth in the same paragraph.

前項の作業に従事する労働者は、タイヤの種類に応じて空気の圧力を適正に調節し、及び同項の器具を使用しなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy