The employer must conform to the following requirements for the valves or cocks of chemical facilities:
事業者は、化学設備のバルブ又はコックについては、次に定めるところによらなければならない。
to make the valves or cocks with durable materials in accordance with the frequency of opening and closing the valves or cocks, or the type, temperature, concentration, etc., of the dangerous goods, etc., pertaining to manufacturing or handling of chemicals; and
開閉のひん度及び製造又は取扱いに係る危険物等の種類、温度、濃度等に応じ、耐久性のある材料で造ること。
to provide double valves or cocks between the strainers, etc. that are frequently opened or removed during the use of chemical facilities and the nearest chemical facilities (excluding piping; hereinafter the same applies in this item); provided, however, that this does not apply when devices enabling confirmation that the valves or cocks between the strainers, etc., and the chemical facilities have been securely closed are provided.
化学設備の使用中にしばしば開放し、又は取り外すことのあるストレーナ等とこれらに最も近接した化学設備(配管を除く。以下この号において同じ。)との間には、二重に設けること。ただし、当該ストレーナ等と当該化学設備の間に設けられるバルブ又はコックが確実に閉止していることを確認することができる装置を設けるときは、この限りでない。
Read this with the articles around it
chemical facilities
「化学設備」
Fixed (not mobile) equipment that makes or handles dangerous goods, or makes or handles substances with a flash point of 65 degrees Celsius or higher at or above that flash point, other than acetylene welding equipment, gas welding equipment using manifolds and drying equipment, as Article 9-3, item (i) of the Order for Enforcement of Industrial Safety and Health Act defines it.
Defined inArticle 4, paragraph (1), item (iii)
dangerous goods, etc
「危険物等」
Dangerous goods, or substances with a flash point of 65 degrees Celsius or higher.
Short name set inArticle 269, paragraph (1)