Search

Search provisions, jump to a law or an article

1 article

Article 262Work of Gas Welding at a Place Where Ventilation Is Insufficient

第二百六十二条(通風等が不十分な場所におけるガス溶接等の作業)

When carrying out the work of welding, fusing, or heating metal using flammable gas and oxygen (hereinafter referred to as "gas, etc." in this Article and the following Article) at places where ventilation or airing is insufficient, the employer must take the following measures in order to prevent explosions, fires or burns due to leakage or discharge of gas, etc., at the places:

事業者は、通風又は換気が不十分な場所において、可燃性ガス及び酸素(以下この条及び次条において「ガス等」という。)を用いて溶接、溶断又は金属の加熱の作業を行なうときは、当該場所におけるガス等の漏えい又は放出による爆発、火災又は火傷を防止するため、次の措置を講じなければならない。

as regards hoses and torches for gas, etc., those that do not have a risk of gas leakage due to their damages, wear, etc. are to be used;

ガス等のホース及び吹管については、損傷、摩耗等によるガス等の漏えいのおそれがないものを使用すること。

as regards connection of connecting parts between hoses and torches and between hoses of gas, etc., to fasten the parts securely with hose bands, hose clips, etc.;

ガス等のホースと吹管及びガス等のホース相互の接続箇所については、ホースバンド、ホースクリツプ等の締付具を用いて確実に締付けを行なうこと。

in supplying gas, etc., to hoses of gas, etc., to supply the gas, etc., after mounting on the hoses a blowpipe that is set so as not to discharge gas, etc., or a firm stop plug in advance;

ガス等のホースにガス等を供給しようとするときは、あらかじめ、当該ホースに、ガス等が放出しない状態にした吹管又は確実な止めせんを装着した後に行なうこと。

to display an indication for preventing operational error of the supply of gas, etc., on the valve or cock of the supply inlet of gas, etc., of the hose being used, by attaching a name tag of the operator who uses the hose connected with the valve or cock, etc.;

使用中のガス等のホースのガス等の供給口のバルブ又はコツクには、当該バルブ又はコツクに接続するガス等のホースを使用する者の名札を取り付ける等ガス等の供給についての誤操作を防ぐための表示をすること。

when carrying out the work of fusing, to provide sufficient ventilation to prevent burns due to the discharge of excessive oxygen from the blowpipes; and

溶断の作業を行なうときは、吹管からの過剰酸素の放出による火傷を防止するため十分な換気を行なうこと。

when leaving the work place due to suspension or completion of the work, to shut the valve or cock of the supply inlet of gas, etc. and detach the hose of gas, etc. from that supply inlet of gas, etc., or move the hose of gas, etc. to a place where there is sufficient natural ventilation or natural air exchange.

作業の中断又は終了により作業箇所を離れるときは、ガス等の供給口のバルブ又はコツクを閉止してガス等のホースを当該ガス等の供給口から取りはずし、又はガス等のホースを自然通風若しくは自然換気が十分な場所へ移動すること。

A worker, when engaging in the work set forth in the preceding paragraph, must not carry out the work unless they conform to the requirements set forth in each item of the same paragraph.

労働者は、前項の作業に従事するときは、同項各号に定めるところによらなければ、当該作業を行なつてはならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy