Search

Search provisions, jump to a law or an article

1 article

Article 176Hoisting Wire Rope

第百七十六条(巻上げ用ワイヤロープ)

As regards hoisting wire ropes to be used on a pile driver, a pile drawer or a boring machine, the employer must take the following measures:

事業者は、くい打機、くい抜機又はボーリングマシンの巻上げ用ワイヤロープについては、次の措置を講じなければならない。

hoisting wire ropes are to have a length sufficient to leave at least two windings on their drum of the hoisting equipment at the time when the dropping weight or hammer is placed at the lowest position, at the position for starting the drawing of a sheet pile or the suspension tool, including the rod, is at its lowest position;

巻上げ用ワイヤロープは、落錘又はハンマーが最低の位置にある場合、矢板等の抜き始めの場合、ロッド等のつり具が最低の位置にある場合等において、巻上げ装置の巻胴に少なくとも二巻を残すことができる長さのものであること。

hoisting wire ropes to be fixed securely to the drum of the hoisting device with clamps, clips, etc.; and

巻上げ用ワイヤロープは、巻上げ装置の巻胴にクランプ、クリツプ等を用いて、確実に取り付けること。

in connecting a dropping weight or a hammer to the hoisting wire rope of the pile driver or connecting the hoisting wire rope of the boring machine to a pulley block, a hoisting swivel, etc., clamps, clips, etc. are to be used to securely connect them.

くい打機の巻上げ用ワイヤロープと落錘、ハンマー等との取付け又はボーリングマシンの巻上げ用ワイヤロープと滑車装置、ホイスティングスイベル等との取付けは、クリップ、クランプ等を用いて確実にすること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy