When carrying out the work using a conveyor, the employer must inspect the following matters before commencing the work for the day:
事業者は、コンベヤーを用いて作業を行うときは、その日の作業を開始する前に、次の事項について点検を行わなければならない。
functions of the prime mover and pulley;
原動機及びプーリーの機能
functions of the uncontrolled flow breaker;
逸走等防止装置の機能
functions of the emergency stop device; and
非常停止装置の機能
abnormalities in the cover, enclosure, etc. of the prime mover, rotating shaft, gear, pulley, etc.
原動機、回転軸、歯車、プーリー等の覆い、囲い等の異常の有無
Read this with the articles around it
uncontrolled flow breaker
「逸走等防止装置」
In Articles 151-77 and 151-82, a device on a conveyor that stops loads or carriers from running away or running backwards because of a power cut, a drop in voltage or the like.
Short name set inArticle 151-77, paragraph (1)· applies only in this provision and in Article 151-82
emergency stop device
「非常停止装置」
In Articles 151-78 and 151-82, a device that can stop a conveyor at once in an emergency.
Short name set inArticle 151-78, paragraph (1)· applies only in this provision and in Article 151-82