When carrying out the work using a vehicle type material handling equipment, etc., the employer must take necessary measures for the traveling route of the equipment, etc., such as maintaining the necessary width and preventing uneven settling of the ground and collapse of shoulder in order to prevent workers from dangers due to overturning or falling of the equipment, etc.
事業者は、車両系荷役運搬機械等を用いて作業を行うときは、車両系荷役運搬機械等の転倒又は転落による労働者の危険を防止するため、当該車両系荷役運搬機械等の運行経路について必要な幅員を保持すること、地盤の不同沈下を防止すること、路肩の崩壊を防止すること等必要な措置を講じなければならない。
When the work using a vehicle type material handling equipment, etc., is carried out at a road shoulder, inclined place, etc., and when there is a risk of endangering workers due to overturning or falling of the equipment, etc., the employer must place a guide, and have the person guide the equipment, etc.
事業者は、路肩、傾斜地等で車両系荷役運搬機械等を用いて作業を行う場合において、当該車両系荷役運搬機械等の転倒又は転落により労働者に危険が生ずるおそれのあるときは、誘導者を配置し、その者に当該車両系荷役運搬機械等を誘導させなければならない。
The operator of the vehicle type material handling equipment, etc., referred to in the preceding paragraph must follow the instructions given by the guide set forth in the same paragraph.
前項の車両系荷役運搬機械等の運転者は、同項の誘導者が行う誘導に従わなければならない。
Read this with the articles around it
vehicle type material handling equipment, etc.
「車両系荷役運搬機械等」
A forklift, shovel loader, fork loader, straddle carrier, rough-terrain carrier, in-plant carrier (a motor vehicle built only to carry loads, at most 4.7 metres long, 1.7 metres wide and 2.0 metres high, with a top speed of 15 kilometres an hour or less) or truck (any other motor vehicle built only to carry loads).
Defined inArticle 151-2, paragraph (1)· applies throughout the law