Search

Search provisions, jump to a law or an article

1 article

Article 147Prevention of Dangers Due to Injection Molding Machines

第百四十七条(射出成形機等による危険の防止)

When there is a risk of getting a part of a body of a worker caught in an injection molding machine, a mold-making machine or a stamping machine, etc., (excluding the machines set forth in Article 130-9 and Section 4 of this Chapter), the employer must provide a door, starting device with two-hand control, and other safety devices.

事業者は、射出成形機、鋳型造形機、型打ち機等(第百三十条の九及び本章第四節の機械を除く。)に労働者が身体の一部を挟まれるおそれのあるときは、戸、両手操作式による起動装置その他の安全装置を設けなければならない。

The door set forth in the preceding paragraph must be constructed so that the machine does not operate unless the door is closed.

前項の戸は、閉じなければ機械が作動しない構造のものでなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy