Search

Search provisions, jump to a law or an article

1 article

Article 106Prevention of Dangers Due to Chips that Come Flying

第百六条(切削屑の飛来等による危険の防止)

When there is a risk of endangering workers due to cutting chips coming flying, etc., the employer must provide a cover or an enclosure for the machine that generates the cutting chips; provided, however, that this does not apply where providing a cover or an enclosure is difficult due to the nature of the work and the employer has had workers use personal protective equipment.

事業者は、切削屑が飛来すること等により労働者に危険を及ぼすおそれのあるときは、当該切削屑を生ずる機械に覆い又は囲いを設けなければならない。ただし、覆い又は囲いを設けることが作業の性質上困難な場合において、労働者に保護具を使用させたときは、この限りでない。

A worker, when having been ordered to use personal protective equipment in the case referred to in the proviso of the preceding paragraph, must use the equipment.

労働者は、前項ただし書の場合において、保護具の使用を命じられたときは、これを使用しなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy