Search

Search provisions, jump to a law or an article

1 article

Article 286Welding at Places Where Ventilation Is Insufficient

第二百八十六条(通風等の不十分な場所での溶接等)

When carrying out the work of welding, fusing, heating metal or other work using fire, or dry grinding using grinding wheels, chipping using a chisel or other work that is likely to produce sparks at a place where ventilation is insufficient, the employer must not use oxygen for the purpose of airing or ventilation.

事業者は、通風又は換気が不十分な場所において、溶接、溶断、金属の加熱その他火気を使用する作業又は研削といしによる乾式研ま、たがねによるはつりその他火花を発するおそれのある作業を行なうときは、酸素を通風又は換気のために使用してはならない。

A worker must not use oxygen for the purpose of airing or ventilation in the case referred to in the preceding paragraph.

労働者は、前項の場合には、酸素を通風又は換気のために使用してはならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy