As regards waste fluid containing harmful substance, the employer must discharge them after processing the waste fluid by neutralization, precipitation, filtration, or other effective methods, in accordance with the type of the harmful substance.
As regards exhaust gas, waste fluids or other waste material contaminated with pathogens, the employer must discharge or dispose them after appropriate processing such as disinfecting or sterilization has been taken.
The employer must sprinkle water or take other necessary measures to prevent dust from being scattered at outdoor workshops or in a pit where a great deal of dust is scattered.
第五百八十三条
(坑内の炭酸ガス濃度の基準)Standards of Concentration of Carbon Dioxide Gas in a Pit
The employer must ensure that the concentration of carbon dioxide gas in the air is kept at 1.5% or less in workshop in pits; provided, however, that this does not apply to lifesaving or danger prevention work using air respirators, oxygen respirators, or hose masks.
第五百八十三条の二
(騒音を発する場所の明示等)Indication of the Place Generating Noise
When having workers engage in work in an indoor workshop where intense noise is generated, the employer is to take measures such as clearly indicating by a sign at a readily visible place that the indoor workshop is a place where intense noise is generated.
In an indoor workshop generating intense noise, the employer must take necessary measures of providing partition, etc., in order to prevent the noise from being propagated.
The employer must prohibit persons other than those concerned from entering the following places by displaying a sign to that effect at a readily visible place or by other means, and when having prohibited entry by a means other than a sign, must display at a readily visible place that entry into the place is prohibited:
一
多量の高熱物体を取り扱う場所又は著しく暑熱な場所
places where a large quantity of high-temperature substances is handled or the temperature is extremely high;
二
多量の低温物体を取り扱う場所又は著しく寒冷な場所
places where a large quantity of low-temperature substances is handled or the temperature is extremely low;
三
有害な光線又は超音波にさらされる場所
places exposed to harmful light or ultrasonic waves;
In the surroundings of a place into which entry is prohibited under the provisions of the preceding paragraph, workers, and persons engaged in work (excluding workers) who are engaged in the work of a project at the same site as workers, must not enter that place without reason.
The employer must ensure that harmful substances, pathogens or substances contaminated with them are accumulated at a fixed place and display a notice to that effect at a readily visible location.
第五百八十七条
(作業環境測定を行うべき作業場)Workshop that Should Carry Out Work Environment Monitoring
第一項
令第二十一条第二号の厚生労働省令で定める暑熱、寒冷又は多湿の屋内作業場は、次のとおりとする。
The indoor workshops having hot, cold or humid condition specified by the Order of the Ministry of Health, Labour and Welfare set forth in Article 21, item (ii) of the Order are as follows:
一
溶鉱炉、平炉、転炉又は電気炉により鉱物又は金属を製錬し、又は精錬する業務を行なう屋内作業場
indoor workshops where the work of smelting or refining minerals or metals by blast furnaces, open-hearth furnaces, converters or electric furnaces, is carried out;
二
キユポラ、るつぼ等により鉱物、金属又はガラスを溶解する業務を行なう屋内作業場
indoor workshops where the work of melting ores, metals or glass by cupola, crucible, etc., is carried out;
三
焼鈍炉、均熱炉、焼入炉、加熱炉等により鉱物、金属又はガラスを加熱する業務を行なう屋内作業場
indoor workshops where the work of heating ores, metals or glass by annealing furnace, soaking furnace, quenching furnace, heating furnace, etc., is carried out;
四
陶磁器、レンガ等を焼成する業務を行なう屋内作業場
indoor workshops where the work of baking ceramic ware, bricks, etc., is carried out;
五
鉱物の焙焼又は焼結の業務を行なう屋内作業場
indoor workshops where the work of roasting or sintering ores is carried out;
六
加熱された金属の運搬又は圧延、鍛造、焼入、伸線等の加工の業務を行なう屋内作業場
indoor workshops where the processing work of carrying, rolling, forging, hardening, drawing, etc. of heated metals is carried out;
七
溶融金属の運搬又は鋳込みの業務を行なう屋内作業場
indoor workshops where the work of carrying, or casting molten metals is carried out;
八
溶融ガラスからガラス製品を成型する業務を行なう屋内作業場
indoor workshops where the work of casting molten glass into glass products is carried out;
九
加硫がまによりゴムを加硫する業務を行なう屋内作業場
indoor workshops where the work of vulcanizing rubber in a vulcanizing pan is carried out;
十
熱源を用いる乾燥室により物を乾燥する業務を行なう屋内作業場
indoor workshops where the work of drying substances in a dryer chamber using a heat source is carried out;
十一
多量の液体空気、ドライアイス等を取り扱う業務を行なう屋内作業場
indoor workshops where the work of handling a large quantity of liquid air, dry ice, etc., is carried out;
十二
冷蔵庫、製氷庫、貯氷庫又は冷凍庫等で、労働者がその内部で作業を行なうもの
refrigerators, ice plants, ice storage facilities, freezing plants, etc., inside which workers carry out work;
十三
多量の蒸気を使用する染色槽により染色する業務を行なう屋内作業場
indoor workshops where the work of dyeing using a dyeing bath, which uses a large quantity of vapor, is carried out;
十四
多量の蒸気を使用する金属又は非金属の洗浄又はめつきの業務を行なう屋内作業場
indoor workshops where the work of cleaning or plating metals or nonmetals by using a large quantity of vapor is carried out;
十五
紡績又は織布の業務を行なう屋内作業場で、給湿を行なうもの
humidifying indoor workshops where the work of spinning or weaving is carried out; and
十六
前各号に掲げるもののほか、厚生労働大臣が定める屋内作業場
beyond what is set forth in the preceding items, the indoor workshops specified by the Minister of Health, Labour and Welfare.
第五百八十八条
第一項
令第二十一条第三号の厚生労働省令で定める著しい騒音を発する屋内作業場は、次のとおりとする。
The indoor workshops generating intense noise prescribed by the Order of the Ministry of Health, Labour and Welfare set forth in Article 21, item (iii) of the Order are as follows:
indoor workshops where the work of handling riveting machines, chipping machines, molding machines or other machines or tools that are driven by compressed air is carried out;
indoor workshops where the work of rolling, drawing out, strain correcting or plate bending metals by rolling mills, etc., (excluding strain correction and plate bending by hydraulic press and drawing out by dies) is carried out;
三
動力により駆動されるハンマーを用いる金属の鍛造又は成型の業務を行なう屋内作業場
indoor workshops where the work of forging or casting metals by power-driven hammers is carried out;
四
タンブラーによる金属製品の研ま又は砂落しの業務を行なう屋内作業場
indoor workshops where the work of polishing or sand-washing metallic products by tumblers is carried out;
五
動力によりチエーン等を用いてドラムかんを洗浄する業務を行なう屋内作業場
indoor workshops where the work of cleaning drums by chains or other tools driven by power is carried out;
六
ドラムバーカーにより、木材を削皮する業務を行なう屋内作業場
indoor workshops where the work of peeling off the bark of wood by drum barkers is carried out;
七
チツパーによりチツプする業務を行なう屋内作業場
indoor workshops where the work of chipping by chippers is carried out;
八
多筒抄紙機により紙を抄く業務を行なう屋内作業場
indoor workshops where the work of manufacturing paper by a multi-cylinder paper manufacturing machine is carried out; and
九
前各号に掲げるもののほか、厚生労働大臣が定める屋内作業場
beyond what is set forth in the preceding items, the indoor workshops specified by the Minister of Health, Labour and Welfare.
第五百八十九条
第一項
令第二十一条第四号の厚生労働省令で定める坑内の作業場は、次のとおりとする。
The workshops in pits prescribed by the Order of the Ministry of Health, Labour and Welfare set forth in Article 21, item (iv) of the Order are as follows:
一
炭酸ガスが停滞し、又は停滞するおそれのある坑内の作業場
workshops in pits where carbon dioxide gas stagnates or is liable to stagnate;
二
気温が二十八度をこえ、又はこえるおそれのある坑内の作業場
workshops in pits where atmospheric temperature exceeds or is liable to exceed 28 degrees; and
三
通気設備が設けられている坑内の作業場
workshops in pits provided with ventilation facilities.
As regards an indoor workshop generating intense noise prescribed in Article 588, the employer must measure the equivalent sound level, periodically once every period not exceeding six months.
When having carried out the measurement pursuant to the provisions of the preceding paragraph, the employer must record the following matters for each measurement and preserve the record for three years:
一
測定日時
the date of the measurement;
二
測定方法
the method of the measurement;
三
測定箇所
the location where the measurement has been performed;
四
測定条件
the conditions under which the measurement has been made;
五
測定結果
the results of the measurement;
六
測定を実施した者の氏名
the name of the person who has carried out the measurement; and
七
測定結果に基づいて改善措置を講じたときは、当該措置の概要
when improvement measures have been taken based on the results of the measurement, the outline of the measures.
When having altered the plant or facilities or having changed the work processes or work methods in the indoor workshop generating intense noise prescribed in Article 588, the employer must measure the equivalent sound level without delay.
第二項
前条第二項の規定は、前項の規定による測定を行つた場合について準用する。
The provisions of paragraph (2) of the preceding Article apply mutatis mutandis to the case where the measurement pursuant to the provisions of the preceding paragraph has been carried out.
第五百九十二条
(坑内の炭酸ガス濃度の測定等)Measurement of Concentration of Carbon Dioxide Gas in a Pit
As regards the workshop in a pit set forth in Article 589, item (i), the employer must measure the concentration of carbon dioxide gas, periodically once every period not exceeding one month.
第二項
第五百九十条第二項の規定は、前項の規定による測定を行つた場合について準用する。
The provisions of Article 590, paragraph (2) apply mutatis mutandis when measurement pursuant to the provisions of the preceding paragraph has been carried out.