When carrying out work using a vehicle type logging machine, the employer must not allow a person engaged in work at the workshop to ride on places other than the seat or the loading platform; provided, however, that this does not apply when measures for preventing dangers due to falling have been taken.
When carrying out work using a vehicle type logging machine, the employer must observe the stability, the maximum loading capacity, the maximum working load, etc., decided on the basis of the structure of the vehicle type logging machine, in order to prevent workers from dangers due to overturning or breaking into a run of the vehicle type logging machine or destruction of working devices such as a boom, an arm, etc.
第百五十一条の百三
(主たる用途以外の使用の制限)Restriction on the Use for Other than Main Purpose
The employer must not use a vehicle type logging machine for a purpose other than its main purpose, such as lifting logs, etc. via a wire rope by a wood grapple.
The provisions of the preceding paragraph do not apply where there is no risk of endangering workers, such as where a hung tree is handled by pulling it down, using a winch and a guide block, in a direction other than toward the operator.
When carrying out the work of repairing a vehicle type logging machine, or fitting or removing its attachments, the employer must designate a person to supervise the work and have the person carry out the following matters:
一
作業手順を決定し、作業を直接指揮すること。
to decide the work procedures, and directly supervise the work; and
When, at a workshop where workers carry out work, causing a vehicle type logging machine whose operating station for traveling differs from its operating station for operating the working device to travel, the employer must not have a person engaged in work ride at the operating station for operating the working device of the vehicle type logging machine.
In the case set forth in the preceding paragraph, a person engaged in work must not ride at the operating station for operating the working device of the vehicle type logging machine set forth in the same paragraph.
When carrying out work using a vehicle type logging machine, the employer must not have the work carried out when dangers are expected in carrying out the work due to bad weather such as strong wind, heavy rain or heavy snow.
When carrying out work using a vehicle type logging machine, the employer must have the workers engaging in the work wear a safety helmet in order to prevent workers from dangers due to objects that come flying or falling.
第二項
前項の作業に従事する労働者は、同項の保護帽を着用しなければならない。
The worker engaging in the work set forth in the preceding paragraph must wear the safety helmet set forth in the same paragraph.
As regards a vehicle type logging machine, the employer must endeavor to carry out inspection of the following matters periodically once every period not exceeding one year; provided, however, that this does not apply to the non-use period of a vehicle type logging machine which is not used for a period exceeding one year:
一
原動機の異常の有無
abnormalities in the prime mover;
二
動力伝達装置及び走行装置の異常の有無
abnormalities in power transmission device and traveling device;
三
制動装置及び操縦装置の異常の有無
abnormalities in braking device and controlling device;
四
作業装置及び油圧装置の異常の有無
abnormalities in the working device and hydraulic system; and
五
車体、ヘツドガード、飛来物防護設備、アウトリガー、電気系統、灯火装置及び計器の異常の有無
abnormalities in the body, head guard, protective equipment against flying objects, outriggers, electrical system, lighting device and meters.
As regards a vehicle type logging machine set forth in the proviso of the preceding paragraph, the employer must endeavor to carry out inspection of the matters listed in each item of the same paragraph when starting its use again.
As regards a vehicle type logging machine, the employer must endeavor to carry out inspection of the following matters periodically once every period not exceeding one month; provided, however, that this does not apply to the non-use period of a vehicle type logging machine which is not used for a period exceeding one month:
一
制動装置、クラツチ及び操縦装置の異常の有無
abnormalities in braking device, clutch and controlling device;
二
作業装置及び油圧装置の異常の有無
abnormalities in the working device and hydraulic system; and
三
ヘツドガード及び飛来物防護設備の異常の有無
abnormalities in head guard and protective equipment against flying objects.
As regards a vehicle type logging machine set forth in the proviso of the preceding paragraph, the employer must endeavor to carry out inspection of the matters listed in each item of the same paragraph when starting its use again.
When having found an abnormality in carrying out the inspection set forth in Article 151-108 or Article 151-109, or the inspection set forth in the preceding Article, the employer must immediately make repairs or take other necessary measures.
第二款 伐木等機械
第百五十一条の百十二
(伐木作業における危険の防止)Prevention of Dangers in Tree Felling Work
When carrying out the work of tree logging using a machine for felling, etc., the employer must have the operator who is to fell standing trees remove, for each standing tree, shrubs, branches, vines, loose stones and other objects that may cause danger when felling or during other work.
The operator set forth in the preceding paragraph must remove, for each standing tree, shrubs, branches, vines, loose stones and other objects that may cause danger when felling or during other work.
第百五十一条の百十三
(造材作業における危険の防止)Prevention of Dangers in Work of Bucking
When carrying out the work of bucking using a machine for felling, etc., the employer must, in order to prevent danger from the logs, etc. being bucked falling or slipping, have the operator who is to carry out the work take measures such as carrying out the work on level ground.
第二項
前項の運転者は、同項の措置を講じなければならない。
The operator set forth in the preceding paragraph must take the measures set forth in the same paragraph.
The safety coefficient set forth in the preceding paragraph is to be the value obtained by dividing the breaking load of a wire rope by the value of the maximum load applied to the wire rope.
第百五十一条の百十五
(不適格なワイヤロープの使用禁止)Prohibition of the Use of an Inadequate Wire Rope
With regard to a wire rope used for the winch or slings of a traveling yarding machine or a wire rope used for securing loads, the employer must not use one that falls under any of the following items:
When carrying out work using a traveling yarding machine, the employer must, before starting the work of the day, inspect the condition of the slings used for the work and the wire ropes used for securing loads, and if an abnormality is found, must immediately repair or replace them.
With regard to the operation of the winch of a traveling yarding machine, the employer must determine fixed signals and the person who gives the signals, and have those signals used in the operation.
第二項
前項の走行集材機械のウインチの運転者は、同項の合図に従わなければならない。
The operator of the winch of the traveling yarding machine set forth in the preceding paragraph must follow the signals set forth in the same paragraph.
第百五十一条の百十八
(原木等の積載)Loading of Logs, etc.
第一項
事業者は、走行集材機械に原木等を積載するときは、次に定めるところによらなければならない。
When loading logs, etc. onto a traveling yarding machine, the employer must comply with the following:
一
偏荷重が生じないように積載すること。
to load them in a manner that prevents uneven loading; and
to take necessary measures such as securing the load with a wire rope, in order to prevent workers from dangers due to collapsing of the load or falling of the logs, etc.
第百五十一条の百十九
(荷台への乗車制限)Restriction of Riding on a Loading Platform
When causing a traveling yarding machine having a loading platform to travel at a workshop where workers carry out work, the employer must not allow a person engaged in work to ride on the loading platform of that traveling yarding machine.
第二項
作業従事者は、前項の場合において同項の荷台に乗車してはならない。
In the case referred to in the preceding paragraph, a person engaged in work must not ride on the loading platform set forth in the same paragraph.
The safety coefficient set forth in the preceding paragraph is to be the value obtained by dividing the breaking load of a wire rope by the value of the maximum load applied to the wire rope.