Search

Search provisions, jump to a law or an article

1 article

Article 328-4Modification of Manufacturing Facilities of Liquid Oxygen

第三百二十八条の四(液化酸素の製造設備の改造等)

In carrying out modification, repairing and cleaning, etc., of the manufacturing facilities of liquid oxygen, when carrying out the work inside the facilities, the employer must comply with the following requirements:

事業者は、液化酸素を製造する設備の改造、修理、清掃等を行う場合において、当該設備の内部で作業を行うときは、次に定めるところによらなければならない。

to decide the method and procedures of the work, and make them known to the workers concerned in advance;

当該作業の方法及び順序を決定し、あらかじめ、これを関係労働者に周知させること。

to designate a supervisor for the work and have the supervisor direct the work;

当該作業の指揮者を定め、その者に当該作業を指揮させること。

to doubly close valves or cocks or apply baffles in addition to closing valves or cocks in order to prevent the workplace from leakage of oxygen; and

作業箇所に酸素が漏えいしないように、バルブ若しくはコックを二重に閉止し、又はバルブ若しくはコックを閉止するとともに閉止板等を施すこと。

to lock the valves, cocks and baffles set forth in the preceding item, display a notice stating that they must not be opened, or place a watcher.

前号のバルブ、コック又は閉止板等に施錠し、これらを開放してはならない旨を表示し、又は監視人を置くこと。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy