When work other than those set forth in Article 6, item (vii) of the Order among work using a power press are carried out, and a changeover key switch for the power press and its safety device have been provided, the employer must designate a person who stores the key switch, and have the person store the key.
As regards a power press, the employer must carry out self-inspections for the following matters periodically once every period not exceeding a year; provided, however, that this does not apply to the non-use period of a power press which is not used for a period exceeding one year:
第百三十四条の三第一項第一号(定期自主検査)
クランクシヤフト、フライホイールその他動力伝達装置の異常の有無
abnormalities in crankshafts, flywheels and other power transmission devices;
第百三十四条の三第一項第二号(定期自主検査)
クラツチ、ブレーキその他制御系統の異常の有無
abnormalities in a clutch, a brake and other controlling systems;
第百三十四条の三第一項第三号(定期自主検査)
一行程一停止機構、急停止機構及び非常停止装置の異常の有無
abnormalities in an anti-repeat device, a quick-stop device or an emergency stop device;
第百三十四条の三第一項第四号(定期自主検査)
スライド、コネクチングロツドその他スライド関係の異常の有無
abnormalities in a slide, a connecting rod or other slide-related parts;
第百三十四条の三第一項第五号(定期自主検査)
電磁弁、圧力調整弁その他空圧系統の異常の有無
abnormalities in a magnet valve, a pressure control valve or other air pressure systems;
第百三十四条の三第一項第六号(定期自主検査)
電磁弁、油圧ポンプその他油圧系統の異常の有無
abnormalities in a magnet valve, a hydraulic pump or other hydraulic systems;
第百三十四条の三第一項第七号(定期自主検査)
リミツトスイツチ、リレーその他電気系統の異常の有無
abnormalities in a limit switch, a relay or other electrical systems;
第百三十四条の三第一項第八号(定期自主検査)
ダイクツシヨン及びその附属機器の異常の有無
abnormalities in a die cushion and its accessories; and
第百三十四条の三第一項第九号(定期自主検査)
スライドによる危険を防止するための機構の異常の有無
abnormalities in the mechanism for preventing dangers due to a slide.
As regards the power press set forth in the proviso of the preceding paragraph, the employer must carry out self-inspection for the matters listed in each item of the same paragraph before resuming the operation.
The provisions of the preceding two paragraphs apply mutatis mutandis to the self-inspection pursuant to the provisions of Article 45, paragraph (2) of the Act. In this case, the term "employer" in these provisions is deemed to be replaced with "individual business operator."
As regards a power-driven shearing machine, the employer must carry out self-inspections for the following matters periodically once every period not exceeding a year; provided, however, that this does not apply to the non-use period of a power-driven shearing machine which is not used for a period exceeding one year:
第百三十五条第一項第一号
クラツチ及びブレーキの異常の有無
abnormalities in a clutch and a brake;
第百三十五条第一項第二号
スライド機構の異常の有無
abnormalities in a sliding mechanism;
第百三十五条第一項第三号
一行程一停止機構、急停止機構及び非常停止装置の異常の有無
abnormalities in an anti-repeat device, a quick-stop device, and an emergency stop device;
第百三十五条第一項第四号
電磁弁、減圧弁及び圧力計の異常の有無
abnormalities in a magnet valve, a pressure-reducing valve and a pressure gauge; and
As regards the shearing machine set forth in the proviso of the preceding paragraph, the employer must carry out self-inspection for the matters listed in each item of the same paragraph before resuming the operation.
The provisions of the preceding two paragraphs apply mutatis mutandis to the self-inspection pursuant to the provisions of Article 45, paragraph (2) of the Act. In this case, the term "employer" in these provisions is deemed to be replaced with "individual business operator."
When having carried out the self-inspections set forth in Article 134-3, paragraph (1) or (2) or paragraph (1) or (2) of the preceding two ArticlesArticle, the employer must record the following matters and preserve the records for three years:
第百三十五条の二第一項第一号(定期自主検査の記録)
検査年月日
the date of the inspection;
第百三十五条の二第一項第二号(定期自主検査の記録)
検査方法
the method of the inspection;
第百三十五条の二第一項第三号(定期自主検査の記録)
検査箇所
the parts of a machine inspected;
第百三十五条の二第一項第四号(定期自主検査の記録)
検査の結果
the results of the inspection;
第百三十五条の二第一項第五号(定期自主検査の記録)
検査を実施した者の氏名
the name of the person who has carried out the inspection; and
第百三十五条の二第一項第六号(定期自主検査の記録)
検査の結果に基づいて補修等の措置を講じたときは、その内容
when measures such as repairs have been taken based on the result of the inspection, the details of the repairs.
The provisions of the preceding paragraph apply mutatis mutandis to the self-inspection pursuant to the provisions of Article 45, paragraph (2) of the Act. In this case, the term "employer" in the preceding paragraph is deemed to be replaced with "individual business operator," and the term "Article 134-3, paragraph (1) or (2) or paragraph (1) or (2) of the preceding Article" is deemed to be replaced with "Article 134-3, paragraph (1) or (2) as applied mutatis mutandis pursuant to paragraph (3) of that Article, or paragraph (1) or (2) of the preceding Article as applied mutatis mutandis pursuant to paragraph (3) of that Article."
The self-inspection prescribed by the Order of the Ministry of Health, Labour and Welfare set forth in Article 45, paragraph (2)(3) of the Act pertaining to a power press (hereinafter referred to as the "specified inspection") is to be the self-inspection prescribed in Article 134-3.
A person who has the qualifications prescribed by the Order of the Ministry of Health, Labour and Welfare set forth in the items of Article 45, paragraph (2)(3) of the Act pertaining to a power press is to be a person who falls under any of the following items:
第百三十五条の三第二項第一号(特定自主検査)
次のいずれかに該当する者で、厚生労働大臣が定める研修を修了したもの
a person who falls under any of the following sub-items and has completed the training course specified by the Minister of Health, Labour and Welfare:
a person who has majored in and graduated from an engineering course of a university or a technical college under the School Education Act (including a person who has been conferred a bachelor's degree by the National Institution for Academic Degrees and Quality Enhancement of Higher Education (limited to one who majored in such a course), a person found to have equivalent or greater scholastic ability, and a person who majored in such a course and completed the first-stage course of a professional university; the same applies in Article 151-24, paragraph (2), item (i), (a)), and has experience of having been engaged in the work of inspection or maintenance of a power press for two years or longer, or design or manufacture of a power press for five years or longer;
a person who has majored in and graduated from an engineering course of a senior high school or a secondary education school under the School Education Act and has experience of having been engaged in the work of inspection or maintenance of a power press for four years or longer, or design or manufacture of a power press for seven years or longer;
a person who has experience of having been engaged in the work of inspection or maintenance of a power press for seven years or longer, or design or manufacture of a power press for 10 years or longer; or
a person who has completed the skill training course for operations supervisor of press machine listed in the Appended Table 18, item (2) of the Act and who has experience of having been engaged in the work using a power press for 10 years or longer; or
第百三十五条の三第二項第二号(特定自主検査)
その他厚生労働大臣が定める者
other persons specified by the Minister of Health, Labour and Welfare.
As regards the application of the provisions of paragraph (1) of the preceding Article (including as applied mutatis mutandis pursuant to paragraph (2) of that Article) when having a registered inspection agency set forth in the items of Article 45, paragraph (2)(3) of the Act (hereinafter referred to as the "registered inspection agency") conduct the specified inspection pertaining to a power press, the term "the name of the person who has carried out the inspection" in paragraph (1), item (v) of the same Article is deemed to be replaced with "the name of the registered inspection agency."
When having carried out the specified inspection pertaining to a power press, the employer or individual business operator must affix an inspection sticker stating the month and year when the specified inspection was carried out at a readily visible part of the power press.
When having found any abnormality in carrying out the self-inspection set forth in Article 134-3 or Article 135, paragraph (1) or (2) or Article 135, paragraph (1) or (2), or the inspection set forth in the preceding Article, the employer must make repairs or take other necessary measures.
When having found any abnormality in carrying out the self-inspection set forth in Article 134-3, paragraph (1) or (2) as applied mutatis mutandis pursuant to paragraph (3) of that Article or Article 135, paragraph (1) or (2) as applied mutatis mutandis pursuant to paragraph (3) of that Article, the individual business operator is to make repairs or take other necessary measures.
第五節 遠心機械
第百三十八条
(ふたの取付け)Fitting of a Lid
第一項
事業者は、遠心機械には、ふたを設けなければならない。
The employer must provide a lid on a centrifugal machine.
第百三十九条
(内容物を取り出す場合の運転停止)Suspension of Operation in Taking Out the Contents
When taking out the contents of a centrifugal machine (excluding the centrifugal machine constructed so that the content is automatically taken out), the employer must suspend the operation of the centrifugal machine.
第百四十条
(最高使用回転数をこえる使用の禁止)Prohibition of Use at Speeds Exceeding Maximum Allowable Rotation
第一項
事業者は、遠心機械については、その最高使用回転数をこえて使用してはならない。
As regards a centrifugal machine, the employer must not use the centrifugal machine at a speed exceeding its maximum allowable rotating speed.
As regards a power-driven centrifugal machine, the employer must carry out self-inspections for the following matters periodically once every period not exceeding a year; provided, however, that this does not apply to the non-use period of a centrifugal machine which is not used for a period exceeding one year:
第百四十一条第一項第一号(定期自主検査)
回転体の異常の有無
abnormalities in rotor;
第百四十一条第一項第二号(定期自主検査)
主軸の軸受部の異常の有無
abnormalities in bearing parts of the main shafts;
第百四十一条第一項第三号(定期自主検査)
ブレーキの異常の有無
abnormalities in brake;
第百四十一条第一項第四号(定期自主検査)
外わくの異常の有無
abnormalities in the outer frame; and
第百四十一条第一項第五号(定期自主検査)
前各号に掲げる部分のボルトのゆるみの有無
the slackness of a bolt used in the parts listed in each preceding item.
As regards the centrifugal machine set forth in the proviso of the preceding paragraph, the employer must carry out self-inspection for the matters listed in each item of the same paragraph before resuming the use.
第百四十一条第三項(定期自主検査)
事業者は、前二項の自主検査を行つたときは、次の事項を記録し、これを三年間保存しなければならない。
When having carried out the self-inspections set forth in the preceding two paragraphs, the employer must record the following matters and preserve the record for three years:
第百四十一条第三項第一号(定期自主検査)
検査年月日
the date of the inspection;
第百四十一条第三項第二号(定期自主検査)
検査方法
the method of the inspection;
第百四十一条第三項第三号(定期自主検査)
検査箇所
the parts inspected;
第百四十一条第三項第四号(定期自主検査)
検査の結果
the results of the inspection;
第百四十一条第三項第五号(定期自主検査)
検査を実施した者の氏名
the name of the person who has carried out the inspection; and
第百四十一条第三項第六号(定期自主検査)
検査の結果に基づいて補修等の措置を講じたときは、その内容
when measures such as repairs have been taken based on the result of the inspection, the details of the repairs.
When having found any abnormality in carrying out the self-inspection set forth in paragraph (1) or paragraph (2), the employer must make repairs or take other necessary measures.
The provisions of paragraphs (1) through (3) apply mutatis mutandis to the self-inspection pursuant to the provisions of Article 45, paragraph (2) of the Act. In this case, the term "employer" in these provisions is deemed to be replaced with "individual business operator."
When having found any abnormality in carrying out the self-inspection set forth in paragraph (1) or paragraph (2) as applied mutatis mutandis pursuant to the preceding paragraph, the individual business operator is to make repairs or take other necessary measures.