Chapter I-3 Logging Machines, etc. (Articles 151-84 to 151-100)
The law as Ministerial Order on the Arrangement, etc. of Related Ministerial Orders upon the Partial Enforcement of the Act Partially Amending the Industrial Safety and Health Act and the Working Environment Measurement Act (Ministry of Health, Labour and Welfare Order No. 29 of 2026) leaves it, with the words it changes marked.
The main text is read a page at a time: a chapter to a page, and a long chapter in runs of articles. The whole main text, and the supplementary provisions and appended tables this amendment changes. Those it leaves untouched are on the page for the text in force.
Chapter I-3 Logging Machines, etc.第一章の三 木材伐出機械等
Section 1 Vehicle Type Logging Machines第一節 車両系木材伐出機械
Subsection 1 General Provisions第一款 総則
Article 151-84第百五十一条の八十四
Definitions(定義)
Article 151-84, paragraph (1)
In this Ministerial Order, "vehicle type logging machine" means a machine for felling, etc., a traveling yarding machine and a cable yarding machine (excluding the case where it is used as a yarder of a skyline logging cable crane or a simplified skyline logging cable crane; the same applies hereinafter in this Section).
The employer must not use a vehicle type logging machine unless it is equipped with a front lamp; provided, however, that this does not apply at a place where the illuminance necessary for carrying out work safely is maintained.
The employer must not use a vehicle type logging machine unless it is equipped with a solid head guard; provided, however, that this does not apply when there is no risk of endangering the operator due to falling of logs, etc.
When there is a risk of endangering the operator due to logs, etc. coming flying, etc., the employer must not use a vehicle type logging machine unless it is equipped with equipment for preventing such danger, such as a protective railing for the operator's seat.
When carrying out work using a vehicle type logging machine, the employer must investigate in advance the landform and condition of the ground, etc., of the place pertaining to the work, and the shape, etc., of the trees to be felled and the logs, etc. to be handled, in order to prevent workers from dangers due to falling of the vehicle type logging machine, collapse of natural ground, etc., and record the result of the investigation.
When carrying out work using a vehicle type logging machine, the employer must in advance establish a work plan suited to what has been learned from the investigation under the preceding Article, and carry out the work in accordance with the work plan.
The work plan set forth in the preceding paragraph must indicate the following matters:
前項の作業計画は、次の事項が示されているものでなければならない。
Article 151-89, paragraph (2), item (i)
the type and capacity of the vehicle type logging machine to be used;
使用する車両系木材伐出機械の種類及び能力
Article 151-89, paragraph (2), item (ii)
the traveling route of the vehicle type logging machine;
車両系木材伐出機械の運行経路
Article 151-89, paragraph (2), item (iii)
the method and place of the work by the vehicle type logging machine; and
車両系木材伐出機械による作業の方法及び場所
Article 151-89, paragraph (2), item (iv)
the emergency measures in the case where an industrial injury occurs and the method of transporting injured or sick persons.
労働災害が発生した場合の応急の措置及び傷病者の搬送の方法
Article 151-89, paragraph (3)
When having formulated the work plan set forth in paragraph (1), the employer must inform the workers concerned of the matters set forth in items (ii) through (iv) of the preceding paragraph.
When carrying out work using a vehicle type logging machine (excluding a machine for felling, etc.), the employer must designate a supervisor for the work, and have the supervisor direct the work based on the work plan set forth in paragraph (1) of the preceding Article.
When carrying out work using a vehicle type logging machine (excluding one that has a maximum speed of 10 km/h or less), the employer must set in advance the appropriate speed limit for the vehicle type logging machine in accordance with the landform and condition of the ground, etc., of the place pertaining to the work, and carry out the work by the set speed limit.
The operator of the vehicle type logging machine set forth in the preceding paragraph must not operate the vehicle type logging machine exceeding the speed limit set forth in the same paragraph.
前項の車両系木材伐出機械の運転者は、同項の制限速度を超えて車両系木材伐出機械を運転してはならない。
Article 151-92第百五十一条の九十二
Prevention of Falling, etc.(転落等の防止等)
Article 151-92, paragraph (1)
When carrying out work using a vehicle type logging machine, the employer must take necessary measures such as maintaining the necessary width for the traveling route of the vehicle type logging machine, preventing collapse of the road shoulder, and removing obstacles such as rocks and stumps, in order to prevent workers from dangers due to overturning or falling of the vehicle type logging machine.
When work using a vehicle type logging machine is carried out at a road shoulder, inclined place, etc., and when there is a risk of endangering workers due to overturning or falling of the vehicle type logging machine, the employer must place a guide, and have the guide guide the vehicle type logging machine.
The operator of the vehicle type logging machine set forth in the preceding paragraph must follow the guidance given by the guide set forth in the same paragraph.
前項の車両系木材伐出機械の運転者は、同項の誘導者が行う誘導に従わなければならない。
Article 151-93第百五十一条の九十三
Article 151-93, paragraph (1)
At a road shoulder, inclined place, etc., where there is a risk of endangering the operator due to overturning or falling of a vehicle type logging machine, the employer must endeavor not to use a vehicle type logging machine other than one that has a roll-over protective structure and is equipped with a seat belt, and must endeavor to have the operator use the seat belt.
The operator of the vehicle type logging machine set forth in the preceding paragraph must follow the signals set forth in the same paragraph.
前項の車両系木材伐出機械の運転者は、同項の合図に従わなければならない。
Article 151-95第百五十一条の九十五
Prevention of Contact(接触の防止)
Article 151-95, paragraph (1)
When carrying out work using a vehicle type logging machine, the employer must prohibit a person engaged in work at the workshop from entering a place where there is a risk of danger due to coming into contact with the vehicle type logging machine in operation or the logs, etc. being handled, by displaying at a readily visible place that such entry is prohibited or by other methods.
When carrying out work using a vehicle type logging machine, the employer must prohibit a person engaged in work at the workshop from entering a place where there is a risk of danger due to objects coming flying, etc. (including a place below the place where the work is being carried out where there is a risk of danger due to logs, etc. falling or sliding), by displaying at a readily visible place that such entry is prohibited or by other methods.
The employer must prohibit a person engaged in work at a workshop where a vehicle type logging machine (excluding that which incorporates, by its structure, a device for preventing a boom, an arm, etc. from unexpectedly descending) is used from entering below the boom, arm, etc., or the logs, etc. supported by them, by displaying at a readily visible place that such entry is prohibited or by other methods; provided, however, that this does not apply when, in carrying out the work of repairs, inspection, etc., the employer has the workers engaged in the work use a safety prop, a safety block, etc., in order to prevent dangers due to unexpected descent of the boom, arm, etc. (where part of the work is contracted to a contractor, when the employer has the workers engaged in the work use a safety prop, a safety block, etc., and also informs the contractor that it is necessary to use a safety prop, a safety block, etc.).
The worker carrying out the work set forth in the proviso of the preceding paragraph must use the safety prop, the safety block, etc., set forth in the proviso of the same paragraph.
前項ただし書の作業を行う労働者は、同項ただし書の安全支柱、安全ブロック等を使用しなければならない。
Article 151-98第百五十一条の九十八
Measures to be Taken When Leaving the Operating Station for Traveling(走行のための運転位置から離れる場合の措置)
Article 151-98, paragraph (1)
When the operator of a vehicle type logging machine leaves the operating station for traveling, the employer must have the operator take the following measures; provided, however, that this does not apply when the operating station for traveling differs from the operating station for operating the working device, and a worker is operating, or is about to operate, the working device at the operating station for operating the working device:
to place a working device such as a wood grapple at the lowest position (for the wood grapple of a vehicle type logging machine equipped with a loading platform, the lowest position on the loading platform); and
to stop the prime mover and take measures to prevent the vehicle type logging machine from breaking into a run, such as securely setting the brake for keeping the machine in a stopped state.
The operator set forth in the preceding paragraph, when leaving the operating station for traveling of the vehicle type logging machine, must take the measures listed in each item of the same paragraph.
In the case set forth in the proviso of paragraph (1), when the operator of the vehicle type logging machine leaves the operating station for traveling, the employer must have the operator take measures to prevent the vehicle type logging machine from breaking into a run, such as securely setting the brake for keeping the vehicle type logging machine in a stopped state.
The operator set forth in the preceding paragraph, when leaving the operating station for traveling of the vehicle type logging machine, must take the measures set forth in the same paragraph.
Prohibition of Leaving the Operating Station for Operating the Working Device(作業装置の運転のための運転位置からの離脱の禁止)
Article 151-99, paragraph (1)
In the case set forth in the proviso of paragraph (1) of the preceding Article, the employer must not allow the operator of the working device of a vehicle type logging machine to leave the operating station for operating the working device while the working device is being operated.
The operator set forth in the preceding paragraph must not leave the operating station for operating the working device while the working device of the vehicle type logging machine is being operated.
Transfer of Vehicle Type Logging Machines(車両系木材伐出機械の移送)
Article 151-100, paragraph (1)
In the case of loading a vehicle type logging machine to a truck, or unloading it from a truck, by self-propelling or towing for transferring the machine, when using a loading plate, fills, etc., the employer must comply with the following requirements in order to prevent dangers due to overturning, falling, etc. of the vehicle type logging machine:
to load or unload the equipment at a level and firm place;
積卸しは、平たんで堅固な場所において行うこと。
Article 151-100, paragraph (1), item (ii)
when using a loading plate, to use a loading plate of sufficient length, width and strength, and securely attach it at an appropriate incline;
道板を使用するときは、十分な長さ、幅及び強度を有する道板を用い、適当な勾配で確実に取り付けること。
Article 151-100, paragraph (1), item (iii)
when using fills or a temporary stand, etc., to secure sufficient width and strength and an appropriate incline.
盛土、仮設台等を使用するときは、十分な幅及び強度並びに適当な勾配を確保すること。
Copy link
Coming into force施行
The day a law or an amendment starts to apply. It is often months or years after promulgation, so that people have time to prepare. The Ministry of Justice's English usually says a law "comes into force" or "comes into effect", and sometimes calls the day its "enforcement date". Its "enforcement" more often means the word's other sense, carrying a law out, as in an Order for Enforcement (施行令), the Cabinet Order (政令) that sets out the details for carrying out an Act.