As regards timber cableways, the employer must indicate the following matters at a readily visible location:
事業者は、運材索道については、次の事項を見やすい箇所に表示しなければならない。
Search provisions, jump to a law or an article
This text is not in force yetIt on 1 April 2027, in 4 months
Read the text in force →労働安全衛生規則
Chapter I-3 Logging Machines, etc. (Articles 151-139 to 151-155)
The law as Ministerial Order Partially Amending the Ordinance on Industrial Safety and Health (Ministry of Health, Labour and Welfare Order No. 112 of 2026) leaves it, with the words it changes marked.
The main text is read a page at a time: a chapter to a page, and a long chapter in runs of articles. The whole main text, and the supplementary provisions and appended tables this amendment changes. Those it leaves untouched are on the page for the text in force.
As regards timber cableways, the employer must indicate the following matters at a readily visible location:
事業者は、運材索道については、次の事項を見やすい箇所に表示しなければならない。
the maximum working load;
最大使用荷重
the distance between carriers; and
搬器と搬器との間隔
the maximum loading capacity for each carrier.
搬器ごとの最大積載荷重
As regards timber cableways, the employer must not use the cableways by applying a load exceeding the maximum working load set forth in item (i) of the preceding paragraph and the maximum loading capacity for each carrier set forth in item (iii) of the same paragraph.
事業者は、運材索道については、前項第一号の最大使用荷重及び同項第三号の搬器ごとの最大積載荷重を超える荷重をかけて使用してはならない。
When carrying out yarding work using a cable yarding machine as the yarder of a skyline logging cable crane, the employer must prohibit persons engaged in work at the workshop from entering places where there is a risk of danger by coming into contact with the cable yarding machine during operation or the logs, etc. being handled, by displaying a notice to that effect at a readily visible location or by other methods.
事業者は、架線集材機械を機械集材装置の集材機として用いて集材の作業を行うときは、運転中の架線集材機械又は取り扱う原木等に接触することにより危険が生ずるおそれのある箇所に当該作業場において作業に従事する作業従事者が立ち入ることについて、禁止する旨を見やすい箇所に表示することその他の方法により禁止しなければならない。
When carrying out forestry cableway work, the employer must, in order to ensure communication between the operator of a skyline logging cable crane or timber cableway and the person who attaches or detaches loads, provide devices such as a telephone and an electric bell, or set fixed signals, and designate a person to use each such device and have that person use it, or designate a person to give the signals and have that person give them.
事業者は、林業架線作業を行うときは、機械集材装置又は運材索道の運転者と荷掛け又は荷外しをする者との間の連絡を確実にするため、電話、電鈴等の装置を設け、又は一定の合図を定め、それぞれ当該装置を使用する者を指名してその者に使用させ、又は当該合図を行う者を指名してその者に行わせなければならない。
The operator set forth in the preceding paragraph must follow the instructions given by the person designated under that paragraph or the signals set forth in that paragraph.
前項の運転者は、同項の指名を受けた者による指示又は同項の合図に従わなければならない。
When carrying out forestry cableway work, the employer must prohibit persons engaged in work at the workshop from entering the following places, by displaying a notice to that effect at a readily visible location or by other methods:
事業者は、林業架線作業を行うときは、当該作業場において作業に従事する作業従事者が次の箇所に立ち入ることについて、禁止する旨を見やすい箇所に表示することその他の方法により禁止しなければならない。
places under the main cable where there is a risk of danger due to logs, etc. falling or descending;
主索の下で、原木等が落下し、又は降下することにより危険を及ぼすおそれのあるところ
places below where logs, etc. are being attached for lifting or yarded, where there is a risk of danger due to the logs, etc. falling or slipping; and
原木等を荷掛けし、又は集材している場所の下方で、原木等が転落し、又は滑ることにより危険を及ぼすおそれのあるところ
places on the inner angle side of a work rope where there is a risk of danger due to the rope or guide blocks, etc. recoiling or flying off.
作業索の内角側で、索又はガイドブロック等が反発し、又は飛来することにより危険を及ぼすおそれのあるところ
When using a cable yarding machine (excluding one in which a device for preventing the boom, arm, etc. from lowering unexpectedly is incorporated by structure) as the yarder of a skyline logging cable crane, and carrying out work such as repairs or inspection under the raised boom, arm, etc. of the cable yarding machine, the employer must, in order to prevent danger to workers due to the boom, arm, etc. lowering unexpectedly, have the workers engaged in the work use safety props, safety blocks, etc.
事業者は、架線集材機械(構造上、ブーム、アーム等が不意に降下することを防止する装置が組み込まれているものを除く。)を機械集材装置の集材機として用いる場合であつて、架線集材機械のブーム、アーム等を上げ、その下で修理、点検等の作業を行うときは、ブーム、アーム等が不意に降下することによる労働者の危険を防止するため、当該作業に従事する労働者に安全支柱、安全ブロツク等を使用させなければならない。
The worker engaging in the work set forth in the preceding paragraph must use the safety prop, safety block, etc., set forth in the same paragraph.
前項の作業に従事する労働者は、同項の安全支柱、安全ブロツク等を使用しなければならない。
The employer must not have a person engaged in work at the workshop where a skyline logging cable crane or timber cableway is used ride on the carrier, lifted cargo, plumb bob, etc. of the skyline logging cable crane or timber cableway that are hung; provided, however, that this does not apply to the case where temporary work such as inspecting or repairing the equipment such as carriers or ropes is carried out and measures that eliminate any risk of danger due to falling are taken.
事業者は、機械集材装置又は運材索道を使用する作業場において作業に従事する作業従事者を、機械集材装置又は運材索道の搬器、つり荷、重錘等の物で、つり下げられているものに乗せてはならない。ただし、搬器、索等の器材の点検、補修等臨時の作業を行う場合で、墜落による危険を生ずるおそれのない措置を講ずるときは、この限りでない。
When carrying out yarding work using a cable yarding machine as the yarder of a skyline logging cable crane, the employer must not have a person engaged in work at the workshop ride in any place other than the riding seat.
事業者は、架線集材機械を機械集材装置の集材機として用いて集材の作業を行うときは、当該作業場において作業に従事する作業従事者を乗車席以外の箇所に乗せてはならない。
A person engaged in work at the workshop set forth in paragraph (1) must not ride on the hung object set forth in that paragraph, except in the case of the proviso to that paragraph.
第一項の作業場において作業に従事する作業従事者は、同項ただし書の場合を除き、同項のつり下げられている物に乗つてはならない。
When carrying out forestry cableway work, if dangers in carrying out that work are expected due to bad weather conditions such as strong wind, heavy rain or heavy snow, the employer must not have the work carried out.
事業者は、林業架線作業を行う場合において、強風、大雨、大雪等の悪天候のため、当該作業の実施について危険が予想されるときは、当該作業を行わせてはならない。
As regards forestry cableway work, the employer must inspect the matters listed in the right column of the following Table in accordance with the cases listed in the left column of the same Table, and immediately make repairs or replacements when having found any abnormality.
| Case Requiring Inspection | Matters to be Inspected |
| When assembly or alteration was carried out When a test run was carried out | Condition of supports and anchors; Abnormality in yarders, timber hauling machines and brakes, and condition of their installation; Abnormality in the main cable, towing rope, work rope, stay rope and anchor rope, and condition of installation of those ropes; Condition of the fastening portion between carriers or loading blocks and wire ropes; Abnormality in the devices such as a telephone and an electric bell set forth in Article 151-141, paragraph (1). |
| After bad weather conditions such as strong wind, heavy rain or heavy snow, and after an earthquake of medium shock or heavier | Condition of supports and anchors; Abnormality in yarders, timber hauling machines and brakes, and condition of their installation; Condition of installation of the main cable, towing rope, work rope, stay rope and anchor rope; Abnormality in the devices such as a telephone and an electric bell set forth in Article 151-141, paragraph (1). |
| Before starting the work of the day | Function of yarders, timber hauling machines and brakes; Abnormality in cargo lifting ropes; Abnormality in the carriers of timber cableways and condition of the fastening portion between carriers and towing ropes; Function of the devices such as a telephone and an electric bell set forth in Article 151-141, paragraph (1). |
事業者は、林業架線作業については、次の表の上欄に掲げる場合に応じ、それぞれ同表の下欄に掲げる事項を点検し、異常を認めたときは、直ちに、補修し、又は取り替えなければならない。
| 点検を要する場合 | 点検事項 |
| 組立て又は変更を行つた場合 試運転を行つた場合 | 支柱及びアンカの状態 集材機、運材機及び制動機の異常の有無及びその据付けの状態 主索、えい索、作業索、控索及び台付け索の異常の有無及びその取付けの状態 搬器又はロージングブロツクとワイヤロープとの緊結部の状態 第百五十一条の百四十一第一項の電話、電鈴等の装置の異常の有無 |
| 強風、大雨、大雪等の悪天候の後及び中震以上の地震の後の場合 | 支柱及びアンカの状態 集材機、運材機及び制動機の異常の有無及びその据付けの状態 主索、えい索、作業索、控索及び台付け索の取付けの状態 第百五十一条の百四十一第一項の電話、電鈴等の装置の異常の有無 |
| その日の作業を開始しようとする場合 | 集材機、運材機及び制動機の機能 荷吊り索の異常の有無 運材索道の搬器の異常の有無及び搬器とえい索との緊結部の状態 第百五十一条の百四十一第一項の電話、電鈴等の装置の機能 |
When using a cable yarding machine as the yarder of a skyline logging cable crane, if the operator of the cable yarding machine leaves the operating station, the employer must have that operator take the following measures:
事業者は、架線集材機械を機械集材装置の集材機として用いる場合において、架線集材機械の運転者が運転位置から離れるときは、当該運転者に次の措置を講じさせなければならない。
to lower the working device to the ground; and
作業装置を地上に下ろすこと。
to stop the prime mover.
原動機を止めること。
When leaving the operating station of the cable yarding machine, the operator set forth in the preceding paragraph must take the measures set forth in the items of that paragraph.
前項の運転者は、架線集材機械の運転位置から離れるときは、同項各号に掲げる措置を講じなければならない。
While a skyline logging cable crane or timber cableway is in operation, the employer must not allow the operator of the skyline logging cable crane or timber cableway to leave the operating station.
事業者は、機械集材装置又は運材索道が運転されている間は、当該機械集材装置又は運材索道の運転者を運転位置から離れさせてはならない。
The operator set forth in the preceding paragraph must not leave the operating station while the skyline logging cable crane or timber cableway is in operation.
前項の運転者は、機械集材装置又は運材索道が運転されている間は、運転位置を離れてはならない。
When having assembled a skyline logging cable crane or timber cableway or having made an alteration that causes changes in the tension of the main cable, the employer must conduct a test on the safety coefficient of the main cable, and perform a test run by applying the maximum working load.
事業者は、機械集材装置若しくは運材索道を組み立て、又は主索の張力に変化を生ずる変更をしたときは、主索の安全係数を検定し、かつ、その最大使用荷重の荷重で試運転を行わなければならない。
When carrying out forestry cableway work, the employer must have the workers engaging in the work wear a safety helmet in order to prevent workers from dangers due to objects that come flying or falling.
事業者は、林業架線作業を行うときは、物体の飛来又は落下による労働者の危険を防止するため、当該作業に従事する労働者に保護帽を着用させなければならない。
The worker engaging in the work set forth in the preceding paragraph must wear the safety helmet set forth in the same paragraph.
前項の作業に従事する労働者は、同項の保護帽を着用しなければならない。
The provisions of Article 151-130, paragraph (1) and Article 151-149 do not apply to timber cableways with a maximum working load of less than 200 kg and with the total of sloped distances of spans of less than 350 m.
第百五十一条の百三十第一項及び第百五十一条の百四十九の規定は、最大使用荷重が二百キログラム未満で、支間の斜距離の合計が三百五十メートル未満の運材索道については、適用しない。
When carrying out simplified forestry cableway work (meaning work of assembling, dismantling, altering or repairing a simplified skyline logging cable crane, or work of yarding using that equipment; the same applies hereinafter), the employer must, in order to prevent danger to workers due to a yarder falling, collapse of the natural ground, collapse of a support, etc., investigate in advance the area, topography, ground condition, etc. of the place where the work is to be carried out, the condition of the standing trees to be used as supports, and the shape, etc. of the logs, etc. to be transported, and record the results.
事業者は、簡易林業架線作業(簡易架線集材装置の組立て、解体、変更若しくは修理の作業又はこの設備による集材の作業をいう。以下同じ。)を行うときは、集材機の転落、地山の崩壊、支柱の倒壊等による労働者の危険を防止するため、あらかじめ、当該作業に係る場所について広さ、地形、地盤の状態等、支柱とする立木の状態及び運搬する原木等の形状等を調査し、その結果を記録しておかなければならない。
When carrying out simplified forestry cableway work, the employer must establish in advance a work plan suited to what has become known through the investigation under the provisions of the preceding Article, and carry out the work in accordance with that work plan.
事業者は、簡易林業架線作業を行うときは、あらかじめ、前条の規定による調査により知り得たところに適応する作業計画を定め、かつ、当該作業計画により作業を行わなければならない。
The work plan set forth in the preceding paragraph must indicate the following matters:
前項の作業計画は、次の事項が示されているものでなければならない。
places where supports and the main equipment is installed;
支柱及び主要機器の配置の場所
type and diameter of wire ropes to be used;
使用するワイヤロープの種類及びその直径
the maximum working load;
最大使用荷重
type and maximum traction force of the yarder of the simplified skyline logging cable crane;
簡易架線集材装置の集材機の種類及び最大けん引力
method of simplified forestry cableway work; and
簡易林業架線作業の方法
emergency measures to be taken in the event of an industrial injury and method of transporting injured or ill persons.
労働災害が発生した場合の応急の措置及び傷病者の搬送の方法
When having formulated the work plan set forth in paragraph (1), the employer must inform the workers concerned of the matters set forth in items (i) through (iii), (v) and (vi) of the preceding paragraph.
事業者は、第一項の作業計画を定めたときは、前項第一号から第三号まで、第五号及び第六号の事項について関係労働者に周知させなければならない。
When carrying out simplified forestry cableway work, the employer must designate a work director for the work and have that person direct the work based on the work plan set forth in paragraph (1) of the preceding Article.
事業者は、簡易林業架線作業を行うときは、当該作業の指揮者を定め、その者に前条第一項の作業計画に基づき作業の指揮を行わせなければならない。
As regards a simplified skyline logging cable crane, the employer must conform to the requirements of the following items:
事業者は、簡易架線集材装置については、次に定めるところによらなければならない。
to provide an effective braking device that can stop carriers or lifted cargos in a timely manner;
搬器又はつり荷を適時停止させることができる有効な制動装置を備えること。
to wind the stay ropes and work ropes to be attached to stationary objects twice or more onto solid stationary objects such as supports, standing trees, stumps, etc., and fasten the ropes securely using clips, clamps or other fastening tools;
控索及び固定物に取り付ける作業索は、支柱、立木、根株等の固定物で堅固なものに二回以上巻き付け、かつ、クリツプ、クランプ等の緊結具を用いて確実に取り付けること。
except where there is no need to stabilize the top of a support with stays, to use two stays or more to stabilize the top of the support, and make the angle formed by a stay and the support 30 degrees or more;
控えで頂部を安定させる必要がない場合を除き、支柱の頂部を安定させるための控えは、二以上とし、控えと支柱とのなす角度を三十度以上とすること。
to securely fasten guide blocks, etc., using shackles, anchor ropes or other fittings that do not have a risk of breaking or coming off by the load applied to the mounting part;
ガイドブロツク等は、取付け部が受ける荷重により破壊し、又は脱落するおそれのないシヤツクル、台付け索等の取付け具を用いて確実に取り付けること。
to use carriers and other accessories that have sufficient strength; and
搬器その他の附属器具は、十分な強度を有するものを使用すること。
when fastening the end of work ropes to a carrier or a loading block, to securely fasten with clips, eye splices or other methods.
作業索の端部を搬器又はロージングブロツクに取り付けるときは、クリツプ止め、アイスプライス等の方法により確実に取り付けること。