Search

Search provisions, jump to a law or an article

This text is not in force yetIt on 1 April 2027, in 4 months

Read the text in force →

Ordinance on Industrial Safety and Health

労働安全衛生規則(ろうどうあんぜんえいせいきそく)

Chapter I-2 Material Handling Equipment (Articles 151-73 to 151-83)

The law as Ministerial Order Partially Amending the Ordinance on Industrial Safety and Health (Ministry of Health, Labour and Welfare Order No. 112 of 2026) leaves it, with the words it changes marked.

The main text is read a page at a time: a chapter to a page, and a long chapter in runs of articles. The whole main text, and the supplementary provisions and appended tables this amendment changes. Those it leaves untouched are on the page for the text in force.

How the changes are shown

Underlined: words the amendment adds. A bar: where it removes words.Underlined: words the amendment adds. Struck through: the words it removes.Underlined: words the amendment adds. Struck through: the words it removes.

Article 151-73第百五十一条の七十三

Article 151-73, paragraph (1)

When traveling a truck with a tailgate on the loading platform, and having a worker ride on the loading platform, the employer must conform to the following requirements:

事業者は、荷台にあおりのある貨物自動車を走行させる場合において、当該荷台に労働者を乗車させるときは、次に定めるところによらなければならない。

Article 151-73, paragraph (1), item (i)

to take measures of providing a stopper, an anti-slipper etc., for the cargos which have a risk of endangering workers due to their shifting in order to prevent workers from dangers due to the shifting of the cargos;

荷の移動による労働者の危険を防止するため、移動により労働者に危険を及ぼすおそれのある荷について、歯止め、滑止め等の措置を講ずること。

Article 151-73, paragraph (1), item (ii)

to have the worker riding on the loading platform carry out the following matters:

荷台に乗車させる労働者に次の事項を行わせること。

Article 151-73, paragraph (1), item (ii), (a)

to close the tailgate securely.

あおりを確実に閉じること。

Article 151-73, paragraph (1), item (ii), (b)

to not ride on the tailgate and other places where there is a risk of causing a worker to fall due to shaking of the tailgate or the truck; and

あおりその他貨物自動車の動揺により労働者が墜落するおそれのある箇所に乗らないこと。

Article 151-73, paragraph (1), item (ii), (c)

to not ride with the highest part of the body of the worker exceeding the height of roof of the operator's seat (the highest part of the cargo when the highest part of the load on the loading platform is higher than the height of the roof of the operator's seat).

労働者の身体の最高部が運転者席の屋根の高さ(荷台上の荷の最高部が運転者席の屋根の高さを超えるときは、当該荷の最高部)を超えて乗らないこと。

Article 151-73, paragraph (2)

The worker set forth in item (ii) of the preceding paragraph must carry out the matters listed in the same item.

前項第二号の労働者は、同号に掲げる事項を行わなければならない。

Article 151-73, paragraph (3)

When traveling a truck with a tailgate on the loading platform at a workshop where workers carry out work, and having a person engaged in work ride on the loading platform, the employer must not have the person engaged in work ride at a place where there is a risk of falling due to the tailgate or other shaking of the truck.

事業者は、労働者が作業を行う作業場において、荷台にあおりのある貨物自動車を走行させる場合において、作業従事者を当該荷台に乗車させるときは、当該作業従事者をあおりその他貨物自動車の動揺により墜落するおそれのある箇所に乗せてはならない。

Article 151-73, paragraph (4)

In the case of the preceding paragraph, the employer must not have a person engaged in work ride with the highest part of the body of the person engaged in work exceeding the height of the roof of the operator's seat.

事業者は、前項の場合には、作業従事者の身体の最高部が運転者席の屋根の高さを超えて乗せてはならない。

Article 151-73, paragraph (5)

In the case of paragraph (3), a person engaged in work must not ride at a place where there is a risk of falling due to the tailgate or other shaking of the truck.

作業従事者は、第三項の場合には、あおりその他貨物自動車の動揺により墜落するおそれのある箇所に乗つてはならない。

Article 151-73, paragraph (6)

In the case of paragraph (3), a person engaged in work must not ride with the highest part of the body exceeding the height of the roof of the operator's seat.

作業従事者は、第三項の場合には、身体の最高部が運転者席の屋根の高さを超えて乗つてはならない。

Article 151-74第百五十一条の七十四

Wearing of Safety Helmets(保護帽の着用)
Article 151-74, paragraph (1)

When carrying out the work of loading cargos on a truck falling under any of the following items (including the work of roping and sheeting) or unloading cargos from a truck falling under any of the following items (including the work of unroping and unsheeting) (in the case of a truck falling under item (iii), only when a tailgate lifter is used), the employer must have the worker engaging in the work wear a safety helmet in order to prevent workers from dangers due to falling:

事業者は、次の各号のいずれかに該当する貨物自動車に荷を積む作業(ロープ掛けの作業及びシート掛けの作業を含む。)又は次の各号のいずれかに該当する貨物自動車から荷を卸す作業(ロープ解きの作業及びシート外しの作業を含む。)を行うとき(第三号に該当する貨物自動車にあつては、テールゲートリフターを使用するときに限る。)は、墜落による労働者の危険を防止するため、当該作業に従事する労働者に保護帽を着用させなければならない。

Article 151-74, paragraph (1), item (i)

a truck having a maximum loading capacity of 5 tons or more;

最大積載量が五トン以上のもの

Article 151-74, paragraph (1), item (ii)

a truck having a maximum loading capacity of 2 tons or more and less than 5 tons, the sides of whose loading platform are structurally open or can be opened and closed by structure; or

最大積載量が二トン以上五トン未満であつて、荷台の側面が構造上開放されているもの又は構造上開閉できるもの

Article 151-74, paragraph (1), item (iii)

a truck having a maximum loading capacity of 2 tons or more and less than 5 tons, on which a tailgate lifter is installed (excluding one falling under the preceding item).

最大積載量が二トン以上五トン未満であつて、テールゲートリフターが設置されているもの(前号に該当するものを除く。)

Article 151-74, paragraph (2)

The worker engaging in the work set forth in the preceding paragraph must wear the safety helmet set forth in the same paragraph.

前項の作業に従事する労働者は、同項の保護帽を着用しなければならない。

Article 151-75第百五十一条の七十五

Inspection(点検)
Article 151-75, paragraph (1)

When carrying out the work using a truck, the employer must inspect the following matters before commencing the work for the day:

事業者は、貨物自動車を用いて作業を行うときは、その日の作業を開始する前に、次の事項について点検を行わなければならない。

Article 151-75, paragraph (1), item (i)

functions of the braking device and controlling device;

制動装置及び操縦装置の機能

Article 151-75, paragraph (1), item (ii)

functions of the cargo handling device and hydraulic system;

荷役装置及び油圧装置の機能

Article 151-75, paragraph (1), item (iii)

abnormalities in the wheels; and

車輪の異常の有無

Article 151-75, paragraph (1), item (iv)

functions of front and rear lamps, the direction indicator and alarming horn.

前照灯、尾灯、方向指示器及び警音器の機能

Article 151-76第百五十一条の七十六

Repairs(補修等)
Article 151-76, paragraph (1)

When having found an abnormality in carrying out the inspection set forth in the preceding Article, the employer must immediately make repairs or take other necessary measures.

事業者は、前条の点検を行つた場合において、異常を認めたときは、直ちに補修その他必要な措置を講じなければならない。

Section 2 Conveyor第二節 コンベヤー

Article 151-77第百五十一条の七十七

Prevention of Uncontrolled Flow(逸走等の防止)
Article 151-77, paragraph (1)

As regards a conveyor (excluding a flow-conveyor, a screw-conveyor, a liquid-conveyor and pneumatic slide; the same applies hereinafter), the employer must not use that without devices designed to prevent uncontrolled flow or back flow of loads or buckets due to power failure, voltage drop, etc., (referred to as "uncontrolled flow breaker" in Article 151-82) equipped; provided, however, that this does not apply when the conveyor is used exclusively in a horizontal condition and when it is not likely to endanger the workers.

事業者は、コンベヤー(フローコンベヤー、スクリューコンベヤー、流体コンベヤー及び空気スライドを除く。以下同じ。)については、停電、電圧降下等による荷又は搬器の逸走及び逆走を防止するための装置(第百五十一条の八十二において「逸走等防止装置」という。)を備えたものでなければ使用してはならない。ただし、専ら水平の状態で使用するときその他労働者に危険を及ぼすおそれのないときは、この限りでない。

Article 151-78第百五十一条の七十八

Emergency Stop Device(非常停止装置)
Article 151-78, paragraph (1)

As regards a conveyor, when there is a risk of endangering workers such as getting a part of a body of the worker caught, the employer must provide a device that enables to immediately stop the operation of a conveyor in an emergency (referred to as "emergency stop device" in Article 151-82).

事業者は、コンベヤーについては、労働者の身体の一部が巻き込まれる等労働者に危険が生ずるおそれのあるときは、非常の場合に直ちにコンベヤーの運転を停止することができる装置(第百五十一条の八十二において「非常停止装置」という。)を備えなければならない。

Article 151-79第百五十一条の七十九

Prevention of Falling of Cargos(荷の落下防止)
Article 151-79, paragraph (1)

When there is a risk of endangering workers due to falling of cargos from a conveyor, the employer must take measures such as providing a cover or an enclosure for the conveyor, etc., in order to prevent cargos from falling.

事業者は、コンベヤーから荷が落下することにより労働者に危険を及ぼすおそれがあるときは、当該コンベヤーに覆い又は囲いを設ける等荷の落下を防止するための措置を講じなければならない。

Article 151-80第百五十一条の八十

Trolley Conveyor(トロリーコンベヤー)
Article 151-80, paragraph (1)

As regards a trolley conveyor, the employer must not use it unless the trolley, chain and hanger are connected to each other securely so as not to become easily disconnected.

事業者は、トロリーコンベヤーについては、トロリーとチェーン及びハンガーとが容易に外れないよう相互に確実に接続されているものでなければ使用してはならない。

Article 151-81第百五十一条の八十一

Restriction of Riding(搭乗の制限)
Article 151-81, paragraph (1)

The employer must not allow a person engaged in work at a workshop where a conveyor is used to ride on a conveyor during operation; provided, however, that this does not apply when measures are taken to prevent dangers due to falling or coming into contact, etc., with respect to a conveyor constructed for transporting persons engaged in work.

事業者は、コンベヤーを使用する作業場において作業に従事する作業従事者を運転中のコンベヤーに乗せてはならない。ただし、作業従事者を運搬する構造のコンベヤーについて、墜落、接触等による危険を防止するための措置を講じた場合は、この限りでない。

Article 151-81, paragraph (2)

A person engaged in work at the workshop set forth in the preceding paragraph must not ride on a conveyor during operation excluding the case referred to in the proviso of the same paragraph.

前項の作業場において作業に従事する作業従事者は、同項ただし書の場合を除き、運転中のコンベヤーに乗つてはならない。

Article 151-82第百五十一条の八十二

Inspection(点検)
Article 151-82, paragraph (1)

When carrying out the work using a conveyor, the employer must inspect the following matters before commencing the work for the day:

事業者は、コンベヤーを用いて作業を行うときは、その日の作業を開始する前に、次の事項について点検を行わなければならない。

Article 151-82, paragraph (1), item (i)

functions of the prime mover and pulley;

原動機及びプーリーの機能

Article 151-82, paragraph (1), item (ii)

functions of the uncontrolled flow breaker;

逸走等防止装置の機能

Article 151-82, paragraph (1), item (iii)

functions of the emergency stop device; and

非常停止装置の機能

Article 151-82, paragraph (1), item (iv)

abnormalities in the cover, enclosure, etc. of the prime mover, rotating shaft, gear, pulley, etc.

原動機、回転軸、歯車、プーリー等の覆い、囲い等の異常の有無

Article 151-83第百五十一条の八十三

Repairs(補修等)
Article 151-83, paragraph (1)

When having found an abnormality in carrying out the inspection set forth in the preceding Article, the employer must immediately make repairs or take other necessary measures.

事業者は、前条の点検を行つた場合において、異常を認めたときは、直ちに補修その他必要な措置を講じなければならない。

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy