事業者は、構内運搬車を用いて作業を行うときは、その日の作業を開始する前に、次の事項について点検を行わなければならない。
When carrying out the work using an in-yard transporting vehicle, the employer must inspect the following matters before commencing the work for the day:
条文、法令、用語を検索します
この条文はまだされていません2028年4月1日から施行予定(16か月後)
いまの条文を読む →第一章の二 荷役運搬機械等(第百五十一条の六十三から第百五十一条の七十二まで)
労働安全衛生規則の一部を改正する省令(令和八年厚生労働省令第六十八号)による改正後の条文です。変わる言葉に印をつけています。
本則は章ごとのページで読みます。長い章は、さらに条のまとまりごとに分けています。本則の全条文と、この改正が変える附則・別表を示します。この改正が触れていない附則や別表は、いま施行されている条文のページでご覧ください。
事業者は、構内運搬車を用いて作業を行うときは、その日の作業を開始する前に、次の事項について点検を行わなければならない。
When carrying out the work using an in-yard transporting vehicle, the employer must inspect the following matters before commencing the work for the day:
制動装置及び操縦装置の機能
functions of the braking device and controlling device;
荷役装置及び油圧装置の機能
functions of the cargo handling device and hydraulic system;
車輪の異常の有無
abnormalities in the wheels; and
前照灯、尾灯、方向指示器及び警音器の機能
functions of front and rear lamps, direction indicator and alarming horn.
事業者は、前条の点検を行つた場合において、異常を認めたときは、直ちに補修その他必要な措置を講じなければならない。
When having found any abnormalities in carrying out the inspection set forth in the preceding Article, the employer must immediately make repairs or take other necessary measures.
事業者は、貨物自動車(運行の用に供するものを除く。以下この条において同じ。)については、次に定めるところに適合するものでなければ、使用してはならない。ただし、第八号の規定は、最高速度が毎時二十キロメートル以下の貨物自動車については、適用しない。
As regards a truck (excluding those used for traveling; hereinafter the same applies in this Article), the employer must not use it unless it conforms to the following requirements; provided, however, that the provisions of item (viii) does not apply to the truck that has the maximum speed of 20 km/h or less:
走行を制動し、及び停止の状態を保持するため、有効な制動装置を備えていること。
having an effective braking device for braking the travel motion and maintaining the stopped state;
運転者席は、運転者が安全な運転を行うことができる視界を有し、かつ、透明で運転者の視野を妨げるようなひずみのない安全ガラスを前面に使用していること。
having an operator's seat that provides an operator with view for operating the vehicle safely and with a safety front glass that does not have a strain that obstructs the operator's vision;
空気入りゴムタイヤは、き裂、コード層の露出その他の著しい損傷のないものであること。
having pneumatic rubber tires without cracks, exposure of cord layers and other marked damages;
前照灯及び尾灯を備えていること。
having front and rear lamps;
かじ取りハンドルの中心から車体の最外側までの距離が六十五センチメートル以上あるもの又は運転者席が車室内にあるものにあつては、当該貨物自動車の車両中心線上の前方及び後方三十メートルの距離から指示部が見通すことのできる位置に左右に一個ずつ方向指示器を備えていること。
having a direction indicator on both the left and right side at places where indicating portions are discernible from a distance of 30 m away from the rear or front of the truck along the center line of the truck's body, for those with distance between the center of the steering wheel and the outermost side of the body of 65 cm or more or those with an operator's seat in the cabin;
警音器を備えていること。
having an alarming horn.
運転者が安全に運転することができる後写鏡及び当該貨物自動車の直前にある障害物を確認することができる鏡を備えていること。
being equipped with a rear mirror enabling the driver to operate the truck safely and a mirror enabling the driver to confirm obstacles directly in front of the truck; and
速度計を備えていること。
being equipped with a speedometer.
事業者は、貨物自動車については、最大積載量その他の能力を超えて使用してはならない。
As regards a truck, the employer must not use it for loading cargos exceeding the maximum loading capacity and for other purposes exceeding its capabilities.
事業者は、最大積載量が二トン以上の貨物自動車に荷を積む作業(ロープ掛けの作業及びシート掛けの作業を含む。)又は最大積載量が二トン以上の貨物自動車から荷を卸す作業(ロープ解きの作業及びシート外しの作業を含む。)を行うときは、墜落による労働者の危険を防止するため、当該作業に従事する労働者が床面と荷台との間及び床面と荷台上の荷の上面との間を安全に昇降するための設備を設けなければならない。
When carrying out the work of loading cargos on a truck having a maximum loading capacity of 2 tons or more (including the work of roping and sheeting) or unloading cargos from a truck having a maximum loading capacity of 2 tons or more (including the work of unroping and unsheeting), the employer must provide equipment for the worker engaging in the work to ascend and descend safely between the floor surface and the loading platform and between the floor surface and the upper surface of the cargos on the loading platform, in order to prevent workers from dangers due to falling.
前項の作業に従事する作業従事者は、床面と荷台との間及び床面と荷台上の荷の上面との間を昇降するときは、同項の昇降するための設備を使用しなければならない。
A person engaged in work who engages in the work set forth in the preceding paragraph, when ascending and descending between the floor surface and the loading platform and between the floor surface and the upper surface of the cargos on the loading platform, must use the equipment for raising and lowering set forth in the same paragraph.
事業者は、次の各号のいずれかに該当する繊維ロープを貨物自動車の荷掛けに使用してはならない。
The employer must not use a fiber rope falling under any of the following items for roping cargos on a truck:
ストランドが切断しているもの
those with cut strands; and
著しい損傷又は腐食があるもの
those with marked damage or corrosion.
事業者は、繊維ロープを貨物自動車の荷掛けに使用するときは、その日の使用を開始する前に、当該繊維ロープを点検し、異常を認めたときは、直ちに取り替えなければならない。
When using a fiber rope for roping cargos on a truck, the employer must inspect the rope before starting the use for the day, and immediately replace it when having found an abnormality.
事業者は、一の荷でその重量が百キログラム以上のものを貨物自動車に積む作業(ロープ掛けの作業及びシート掛けの作業を含む。)又は貨物自動車から卸す作業(ロープ解きの作業及びシート外しの作業を含む。)を行うときは、当該作業を指揮する者を定め、その者に次の事項を行わせなければならない。
When loading a cargo with the weight of 100 kg or more on a truck (including the work of roping and sheeting) or unloading the cargo from a truck (including the work of unroping and unsheeting), the employer must designate a person who supervises the work, and have the person carry out the following matters:
作業手順及び作業手順ごとの作業の方法を決定し、作業を直接指揮すること。
to decide the work procedure and the work method for each work procedure, and directly supervise the work;
器具及び工具を点検し、不良品を取り除くこと。
to inspect the instrument and tool, and remove those defective;
当該作業を行う箇所には、関係労働者以外の労働者を立ち入らせないこと。
not to allow workers other than those concerned to enter the place where the work is carried out;
ロープ解きの作業及びシート外しの作業を行うときは、荷台上の荷の落下の危険がないことを確認した後に当該作業の着手を指示すること。
when carrying out the work of unroping or unsheeting, to instruct the commencement of the work after having confirmed that there is no danger of cargos falling from the loading platform; and
第百五十一条の六十七第一項の昇降するための設備及び保護帽の使用状況を監視すること。
to monitor the use of equipment for lifting and lowering set forth in Article 151-67, paragraph (1) and a safety helmet.
事業者は、関係する作業従事者以外の者(労働者を除く。)が前項の作業を行う箇所に立ち入ることについて、禁止する旨を見やすい箇所に表示することその他の方法により禁止しなければならない。
The employer must prohibit persons (excluding workers) other than the relevant persons engaged in work from entering the place where the work set forth in the preceding paragraph is carried out, by displaying at a readily visible place that such entry is prohibited or by other methods.
事業者は、貨物自動車から荷を卸す作業を行うときは、当該作業に従事する労働者に中抜きをさせてはならない。
When carrying out the work of unloading cargos from a truck, the employer must not allow the worker engaging in the work to pull out middle cargo from the pile.
前項の作業に従事する労働者は、中抜きをしてはならない。
The worker engaging in the work set forth in the preceding paragraph must not pull out middle cargo from the pile.
事業者は、労働者が作業を行う作業場において、荷台にあおりのない貨物自動車を走行させるときは、当該荷台に作業従事者を乗車させてはならない。
When traveling a truck without a tailgate on the loading platform at a workshop where workers carry out work, the employer must not allow a person engaged in work to ride on the loading platform.
作業従事者は、前項の場合において同項の荷台に乗車してはならない。
In the case referred to in the preceding paragraph, a person engaged in work must not ride on the loading platform set forth in the same paragraph.