| Type | Specifications |
| Type 1 handcuffs | They are to be handcuffs consisting of two metal rings connected by a chain, each of which can be opened and closed, is held in place by a ratchet and can be locked. Their shape is as shown in the Appended Figure. |
| Type 2 handcuffs | They are to be handcuffs consisting of a trapezoidal connecting plate made of metal or of a material with a strength equal to or greater than that of metal, to whose left and right sides are joined rings that can be tightened and loosened by a locking device in order to secure the wrists, the whole being covered with leather and chemical fiber, the connecting plate being not less than 15 millimeters and not more than 160 millimeters long on its upper side and not less than 80 millimeters and not more than 210 millimeters long on its lower side, and the wristbands being approximately 80 millimeters wide. Their shape is as shown in the Appended Figure. |
| Type 3 handcuffs | They are to be a rope made of chemical fiber, approximately not less than 3 millimeters and not more than 15 millimeters wide, not less than 1 millimeter and not more than 10 millimeters thick and not more than 1 meter 50 centimeters long, provided with a non-metal fastener that fixes the rope in a loop. Their shape is as shown in the Appended Figure. |
| Type 1 arresting rope | It is to be a rope made of hemp or chemical fiber, approximately not less than 3 millimeters and not more than 15 millimeters in diameter and not more than 6 meters long. |
| Type 2 arresting rope | The same as a Type 1 arresting rope; provided, however, that it is to have a metal wire passed through the core of the rope and an openable metal fitting not more than 10 centimeters long provided at one end of the rope. |