In this Section, the term "demolition machine" means a machine listed in Appended Table 7, item (vi) of the Order, which is power-driven and capable of self-propelling to unspecified places.
この節において解体用機械とは、令別表第七第六号に掲げる機械で、動力を用い、かつ、不特定の場所に自走できるものをいう。
Search provisions, jump to a law or an article
This text is not in force yetIt on 1 April 2027, in 4 months
Read the text in force →労働安全衛生規則
Chapter II Construction Machines (Articles 151-175 to 164)
The law as Ministerial Order Partially Amending the Safety Ordinance for Cranes and the Ordinance on Industrial Safety and Health (Ministry of Health, Labour and Welfare Order No. 90 of 2026) leaves it, with the words it changes marked.
The main text is read a page at a time: a chapter to a page, and a long chapter in runs of articles. The whole main text, and the supplementary provisions and appended tables this amendment changes. Those it leaves untouched are on the page for the text in force.
In this Section, the term "demolition machine" means a machine listed in Appended Table 7, item (vi) of the Order, which is power-driven and capable of self-propelling to unspecified places.
この節において解体用機械とは、令別表第七第六号に掲げる機械で、動力を用い、かつ、不特定の場所に自走できるものをいう。
The machines specified by Order of the Ministry of Health, Labour and Welfare in Appended Table 7, item (vi), 2 of the Order are as follows:
令別表第七第六号2の厚生労働省令で定める機械は、次のとおりとする。
steel frame cutting machine;
鉄骨切断機
concrete crusher;
コンクリート圧砕機
demolition grabbing machine.
解体用つかみ機
The employer must provide a vehicle type construction machine with a front lamp; provided, however, that this does not apply to a vehicle type construction machine used at a place where necessary illumination for safely carrying out the work is maintained.
事業者は、車両系建設機械には、前照灯を備えなければならない。ただし、作業を安全に行うため必要な照度が保持されている場所において使用する車両系建設機械については、この限りでない。
When using a vehicle type construction machine (limited to a bulldozer, a tractor shovel, a muck loader, a power shovel, a drag shovel and a demolition machine) in a place where there is a risk of endangering workers due to falling of rocks, etc., the employer must provide the vehicle type construction machine with a solid head guard.
事業者は、岩石の落下等により労働者に危険が生ずるおそれのある場所で車両系建設機械(ブル・ドーザー、トラクター・ショベル、ずり積機、パワー・ショベル、ドラグ・ショベル及び解体用機械に限る。)を使用するときは、当該車両系建設機械に堅固なヘッドガードを備えなければならない。
When carrying out the work using a vehicle type construction machine, the employer must investigate in advance the landform and condition of the nature of the soil, etc., of the place pertaining to the work in order to prevent workers from dangers due to falling of the machine, collapse of natural ground, etc., and record the result of the investigation.
事業者は、車両系建設機械を用いて作業を行なうときは、当該車両系建設機械の転落、地山の崩壊等による労働者の危険を防止するため、あらかじめ、当該作業に係る場所について地形、地質の状態等を調査し、その結果を記録しておかなければならない。
When carrying out the work using a vehicle type construction machine, the employer must establish in advance a work plan that conforms to what became known by the investigation pursuant to the provisions of the preceding Article, and carry out the work according to the work plan.
事業者は、車両系建設機械を用いて作業を行なうときは、あらかじめ、前条の規定による調査により知り得たところに適応する作業計画を定め、かつ、当該作業計画により作業を行なわなければならない。
The work plan set forth in the preceding paragraph must indicate the following matters:
前項の作業計画は、次の事項が示されているものでなければならない。
the type and capability of the vehicle type construction machine to be used;
使用する車両系建設機械の種類及び能力
the traveling route of the vehicle type construction machine; and
車両系建設機械の運行経路
the method of work by the vehicle type construction machine.
車両系建設機械による作業の方法
When having established the work plan set forth in paragraph (1), the employer must make the matters set forth in items (ii) and (iii) of the preceding paragraph known to the workers concerned.
事業者は、第一項の作業計画を定めたときは、前項第二号及び第三号の事項について関係労働者に周知させなければならない。
When carrying out the work using a vehicle type construction machine (excluding those with the maximum speed of 10 km/h or less), the employer must, in advance, set the appropriate speed limit for the vehicle type construction machine in accordance with the landform and conditions of nature of the soil, etc., of the place pertaining to the work and carry out the work by the set speed limit.
事業者は、車両系建設機械(最高速度が毎時十キロメートル以下のものを除く。)を用いて作業を行なうときは、あらかじめ、当該作業に係る場所の地形、地質の状態等に応じた車両系建設機械の適正な制限速度を定め、それにより作業を行なわなければならない。
The operator of the vehicle type construction machine set forth in the preceding paragraph must not operate the vehicle type construction machine at a speed exceeding the speed limit set forth in the same paragraph.
前項の車両系建設機械の運転者は、同項の制限速度をこえて車両系建設機械を運転してはならない。
When carrying out the work using a vehicle type construction machine, the employer must take necessary measures for the operation route of the machine, such as preventing collapse of the shoulder and uneven settling of the ground, and maintaining the necessary width in order to prevent workers from dangers due to overturning or falling of the machine.
事業者は、車両系建設機械を用いて作業を行うときは、車両系建設機械の転倒又は転落による労働者の危険を防止するため、当該車両系建設機械の運行経路について路肩の崩壊を防止すること、地盤の不同沈下を防止すること、必要な幅員を保持すること等必要な措置を講じなければならない。
When the work using a vehicle type construction machine is carried out at road shoulder, inclined place, etc., and there is a risk of endangering workers due to overturning or falling of the machine, the employer must place a guide, and have the person guide the machine.
事業者は、路肩、傾斜地等で車両系建設機械を用いて作業を行う場合において、当該車両系建設機械の転倒又は転落により労働者に危険が生ずるおそれのあるときは、誘導者を配置し、その者に当該車両系建設機械を誘導させなければならない。
The operator of a vehicle type construction machine set forth in the preceding paragraph must follow the instructions given by the guide set forth in the same paragraph.
前項の車両系建設機械の運転者は、同項の誘導者が行う誘導に従わなければならない。
At a road shoulder, an inclined place, etc. where there is a risk of endangering the operator due to overturning or falling of a vehicle type construction machine, the employer must endeavor not to use a vehicle type construction machine other than one that has a roll-over protective structure and is equipped with a seat belt, and must endeavor to have the operator use the seat belt.
事業者は、路肩、傾斜地等であつて、車両系建設機械の転倒又は転落により運転者に危険が生ずるおそれのある場所においては、転倒時保護構造を有し、かつ、シートベルトを備えたもの以外の車両系建設機械を使用しないように努めるとともに、運転者にシートベルトを使用させるように努めなければならない。
When carrying out work using a vehicle type construction machine, the employer must prohibit a person engaged in work at the workshop from entering a place where there is a risk of danger due to contact with the vehicle type construction machine in operation, by indicating the prohibition in a conspicuous place or by other methods; provided, however, that this does not apply when the employer arranges a guide and has the person guide the machine.
事業者は、車両系建設機械を用いて作業を行うときは、運転中の車両系建設機械に接触することにより危険が生ずるおそれのある箇所に当該作業場において作業に従事する作業従事者が立ち入ることについて、禁止する旨を見やすい箇所に表示することその他の方法により禁止しなければならない。ただし、誘導者を配置し、その者に当該車両系建設機械を誘導させるときは、この限りでない。
The operator of the vehicle type construction machine set forth in the preceding paragraph must follow the instructions given by the guide set forth in the proviso of the same paragraph.
前項の車両系建設機械の運転者は、同項ただし書の誘導者が行う誘導に従わなければならない。
When placing a guide for operation of a vehicle type construction machine, the employer must set fixed signals and have the guide give the signals.
事業者は、車両系建設機械の運転について誘導者を置くときは、一定の合図を定め、誘導者に当該合図を行なわせなければならない。
The operator of the vehicle type construction machine set forth in the preceding paragraph must follow the signals set forth in the same paragraph.
前項の車両系建設機械の運転者は、同項の合図に従わなければならない。
When the operator of a vehicle type construction machine leaves the operating station, the employer must have the operator take the following measures:
事業者は、車両系建設機械の運転者が運転位置から離れるときは、当該運転者に次の措置を講じさせなければならない。
to place the working device such as a bucket, ripper, etc., on the ground; and
バケツト、ジツパー等の作業装置を地上に下ろすこと。
to stop the prime mover and take measures such as setting the traveling brake in order to prevent the vehicle type construction machine from running away.
原動機を止め、かつ、走行ブレーキをかける等の車両系建設機械の逸走を防止する措置を講ずること。
The operator set forth in the preceding paragraph must take measures listed in each item of the same paragraph when leaving the operating station of a vehicle type construction machine.
前項の運転者は、車両系建設機械の運転位置から離れるときは、同項各号に掲げる措置を講じなければならない。
In the case of loading a vehicle type construction machine onto a truck, or unloading it from a truck, by self-propelling or towing for transferring the machine, when using loading plates, fills, etc., the employer must comply with the following requirements in order to prevent dangers due to overturning, falling, etc. of the vehicle type construction machine:
事業者は、車両系建設機械を移送するため自走又はけん引により貨物自動車に積卸しを行う場合において、道板、盛土等を使用するときは、当該車両系建設機械の転倒、転落等による危険を防止するため、次に定めるところによらなければならない。
to load or unload the machine at a level and firm place;
積卸しは、平たんで堅固な場所において行なうこと。
when using a loading plate, to use the plate with sufficient length, width and strength, and fix it securely with appropriate incline; and
道板を使用するときは、十分な長さ、幅及び強度を有する道板を用い、適当なこう配で確実に取り付けること。
when using fills, a temporary stand, etc., to secure sufficient width and strength, and an appropriate incline.
盛土、仮設台等を使用するときは、十分な幅及び強度並びに適度な勾配を確保すること。
When carrying out work using a vehicle type construction machine, the employer must not have a person engaged in work at the workshop ride in any place other than the riding seat.
事業者は、車両系建設機械を用いて作業を行うときは、当該作業場において作業に従事する作業従事者を乗車席以外の箇所に乗せてはならない。
When carrying out the work using a vehicle type construction machine, the employer must observe the stability, the maximum working load, etc., decided on the basis of its structure in order to prevent workers from dangers due to overturning or destruction of working devices such as a boom, an arm, etc.
事業者は、車両系建設機械を用いて作業を行うときは、転倒及びブーム、アーム等の作業装置の破壊による労働者の危険を防止するため、当該車両系建設機械についてその構造上定められた安定度、最大使用荷重等を守らなければならない。
The employer must not use a vehicle type construction machine for purpose other than its main purpose such as to hoist loads by using a power shovel or to raise or lower workers in a clamshell.
事業者は、車両系建設機械を、パワー・ショベルによる荷のつり上げ、クラムシェルによる労働者の昇降等当該車両系建設機械の主たる用途以外の用途に使用してはならない。
The provisions of the preceding paragraph do not apply to a case that falls under any of the following items:
前項の規定は、次のいずれかに該当する場合には適用しない。
the case falling under all of the following sub-items, when the load lifting work is carried out:
荷のつり上げの作業を行う場合であつて、次のいずれにも該当するとき。
when it is unavoidable due to the nature of the work or necessary for the safe implementation of the work;
作業の性質上やむを得ないとき又は安全な作業の遂行上必要なとき。
when metal parts of a hook and a shackle or any other hoisting parts falling under all of the following conditions are fitted to the work device such as an arm or a bucket:
アーム、バケット等の作業装置に次のいずれにも該当するフック、シャックル等の金具その他のつり上げ用の器具を取り付けて使用するとき。
those having sufficient strength in accordance with the load to be applied;
負荷させる荷重に応じた十分な強度を有するものであること。
those that pose no risk of the lifted load falling from the device, owing to the use of a detachment prevention device, etc.;
外れ止め装置が使用されていること等により当該器具からつり上げた荷が落下するおそれのないものであること。
those that pose no risk of coming off the working device;
作業装置から外れるおそれのないものであること。
when work other than lifting a load is carried out, and there is no risk of endangering the workers.
荷のつり上げの作業以外の作業を行う場合であつて、労働者に危険を及ぼすおそれのないとき。
When carrying out the load lifting work falling under item (i), (a) and (b) of the preceding paragraph, the employer must take the following measures in order to prevent dangers due to contact between a person engaged in work at the workshop and the lifted load, falling of the lifted load, or overturning or falling of the vehicle type construction machine:
事業者は、前項第一号イ及びロに該当する荷のつり上げの作業を行う場合には、当該作業場において作業に従事する作業従事者とつり上げた荷との接触、つり上げた荷の落下又は車両系建設機械の転倒若しくは転落による危険を防止するため、次の措置を講じなければならない。
to set fixed signals for load lifting work, as well as designate a person who gives the signals and have the person give the signals;
荷のつり上げの作業について一定の合図を定めるとともに、合図を行う者を指名して、その者に合図を行わせること。
to carry out the work on a level place;
平坦な場所で作業を行うこと。
to prohibit a person engaged in work from entering a place where there is a risk of danger due to contact with the lifted load or falling of the lifted load, by indicating the prohibition in a conspicuous place or by other methods;
つり上げた荷との接触又はつり上げた荷の落下により危険が生ずるおそれのある箇所に作業従事者が立ち入ることについて、禁止する旨を見やすい箇所に表示することその他の方法により禁止すること。
to not apply the load that exceeds the maximum load established in accordance with the structure and material of the vehicle type construction machine;
当該車両系建設機械の構造及び材料に応じて定められた負荷させることができる最大の荷重を超える荷重を掛けて作業を行わないこと。
to use a wire rope falling under all of the following cases in the case where the wire rope is used as the slinging equipment:
ワイヤロープを玉掛用具として使用する場合にあつては、次のいずれにも該当するワイヤロープを使用すること。
those with a safety coefficient (meaning a safety coefficient prescribed in Article 213, paragraph (2) of the Crane Ordinance) of 6 or more;
安全係数(クレーン則第二百十三条第二項に規定する安全係数をいう。)の値が六以上のものであること。
those with less than 10% of the element wires (excluding filler wires) are cut in one strand;
ワイヤロープ一よりの間において素線(フィラ線を除く。)のうち切断しているものが十パーセント未満のものであること。
those with the reduction ratio of a diameter 7 % or less of the nominal diameter;
直径の減少が公称径の七パーセント以下のものであること。
those without kinks;
キンクしていないものであること。
those without marked deformation or corrosion;
著しい形崩れ及び腐食がないものであること。
to use a suspension chain falling under all of the following conditions when the suspension chain is used as the slinging equipment:
つりチェーンを玉掛用具として使用する場合にあつては、次のいずれにも該当するつりチェーンを使用すること。
those with a safety coefficient (meaning a safety coefficient prescribed in Article 213-2, paragraph (2) of the Crane Ordinance) equal to or above the value listed in 1 or 2 below in accordance with the classification of chains listed in 1 or 2 below:
安全係数(クレーン則第二百十三条の二第二項に規定する安全係数をいう。)の値が、次の(1)又は(2)に掲げるつりチェーンの区分に応じ、当該(1)又は(2)に掲げる値以上のものであること。
Lifting chains that fall under all of the following: 4
| Tensile strength (unit: N/mm2) | Elongation (unit: percent) |
| 400 or more but less than 630 | 20 |
| 630 or more but less than 1,000 | 17 |
| 1,000 or more | 15 |
次のいずれにも該当するつりチェーン 四
| 引張強さ(単位 ニュートン毎平方ミリメートル) | 伸び(単位 パーセント) |
| 四百以上六百三十未満 | 二十 |
| 六百三十以上千未満 | 十七 |
| 千以上 | 十五 |
those with an elongation of 0.5 % or less when loaded with one half of the breaking load;
切断荷重の二分の一の荷重で引つ張つた場合において、その伸びが〇・五パーセント以下のものであること。
those whose tensile strength is 400 N/mm2 or more and whose elongation is, in accordance with the value of tensile strength listed in the left column of the following Table, equal to or more than the value listed in the right column of the same Table;
その引張強さの値が四百ニュートン毎平方ミリメートル以上であり、かつ、その伸びが、次の表の上欄に掲げる引張強さの値に応じ、それぞれ同表の下欄に掲げる値以上となるものであること。
Lifting chains that do not fall under (1): 5
(1)に該当しないつりチェーン 五
those with the extension of 5 % or less of the length of the chain when it was manufactured;
伸びが、当該つりチェーンが製造されたときの長さの五パーセント以下のものであること。
those with a reduction in section diameter of the links of 10 % or less of the section diameter of the links at the time of manufacture of the chain;
リンクの断面の直径の減少が、当該つりチェーンが製造されたときの当該リンクの断面の直径の十パーセント以下のものであること。
those without cracks;
亀裂がないものであること。
when using something other than a wire rope or a lifting chain as the slinging equipment, to use the thing without marked damage or corrosion.
ワイヤロープ及びつりチェーン以外のものを玉掛用具として使用する場合にあつては、著しい損傷及び腐食がないものを使用すること。