Search

Search provisions, jump to a law or an article

This text is not in force yetIt on 1 April 2027, in 4 months

Read the text in force →

Ordinance on Industrial Safety and Health

労働安全衛生規則(ろうどうあんぜんえいせいきそく)

Chapter I Prevention of Dangers Due to Machines (Articles 125 to 134)

The law as Ministerial Order Partially Amending the Safety Ordinance for Cranes and the Ordinance on Industrial Safety and Health (Ministry of Health, Labour and Welfare Order No. 90 of 2026) leaves it, with the words it changes marked.

The main text is read a page at a time: a chapter to a page, and a long chapter in runs of articles. The whole main text, and the supplementary provisions and appended tables this amendment changes. Those it leaves untouched are on the page for the text in force.

How the changes are shown

Underlined: words the amendment adds. A bar: where it removes words.Underlined: words the amendment adds. Struck through: the words it removes.Underlined: words the amendment adds. Struck through: the words it removes.

Article 125第百二十五条

Cover on Feeding Roller of a Band Saw(帯のこ盤の送りローラーの覆い等)
Article 125, paragraph (1)

The employer must provide a preventive device for contact or a cover on a spiked or a toothed feeding roller of a woodworking band saw excluding the feeding side; provided, however, that this does not apply to those equipped with a quick stop device, which enables an operator to stop the operation of spiked or toothed feeding rollers.

事業者は、木材加工用帯のこ盤のスパイクつき送りローラー又はのこ歯形送りローラーには、送り側を除いて、接触予防装置又は覆いを設けなければならない。ただし、作業者がスパイクつき送りローラー又はのこ歯形送りローラーを停止することができる急停止装置が設けられているものについては、この限りでない。

Article 126第百二十六条

Preventive Device for Contact with a Blade of a Hand Feed Planer(手押しかんな盤の刃の接触予防装置)
Article 126, paragraph (1)

The employer must provide a preventive device for contact with a blade of a hand feed planer.

事業者は、手押しかんな盤には、刃の接触予防装置を設けなければならない。

Article 127第百二十七条

Preventive Device for Contact with Wood Shaper Blades(面取り盤の刃の接触予防装置)
Article 127, paragraph (1)

The employer must provide a preventive device for contact with a wood shaper blade (excluding a wood shaper equipped with an automatic feeding device); provided, however, that this does not apply when providing a preventive device for contact is difficult due to the nature of the work, and having a worker use a jig or a tool.

事業者は、面取り盤(自動送り装置を有するものを除く。)には、刃の接触予防装置を設けなければならない。ただし、接触予防装置を設けることが作業の性質上困難な場合において、労働者に治具又は工具を使用させたときは、この限りでない。

Article 127, paragraph (2)

A worker, in the case referred to in the proviso of the preceding paragraph, and having been instructed to use a jig or a tool, must use the jig or the tool.

労働者は、前項ただし書の場合において、治具又は工具の使用を命じられたときは、これらを使用しなければならない。

Article 128第百二十八条

Prohibition of Entry(立入禁止)
Article 128, paragraph (1)

With regard to a person engaged in work in a workshop where an automatic log carriage type band saw is used entering the space between the log carriage and the teeth of the band saw, the employer must prohibit such entry by displaying a notice to that effect in a conspicuous place or by other methods, and, where the employer has prohibited it by a method other than display, must display in a conspicuous place a notice that the place is off-limits.

事業者は、自動送材車式帯のこ盤を使用する作業場において作業に従事する作業従事者が自動送材車式帯のこ盤の送材車と歯との間に立ち入ることについて、禁止する旨を見やすい箇所に表示することその他の方法により禁止するとともに、表示以外の方法により禁止したときは、当該箇所が立入禁止である旨を見やすい箇所に表示しなければならない。

Article 128, paragraph (2)

A person engaged in work in the workshop set forth in the preceding paragraph may not enter a place where entry is prohibited pursuant to the provisions of the same paragraph.

前項の作業場において作業に従事する作業従事者は、同項の規定により立ち入ることを禁止された箇所に立ち入つてはならない。

Article 129第百二十九条

Appointment of an Operations Supervisor of Wood Processing Machines(木材加工用機械作業主任者の選任)
Article 129, paragraph (1)

As regards the work set forth in Article 6, item (vi) of the Order, the employer must appoint an operations supervisor of wood processing machines from the persons who have completed the skill training course for operations supervisor of wood processing machines.

事業者は、令第六条第六号の作業については、木材加工用機械作業主任者技能講習を修了した者のうちから、木材加工用機械作業主任者を選任しなければならない。

Article 130第百三十条

Duties of the Operations Supervisor of Wood Processing Machines(木材加工用機械作業主任者の職務)
Article 130, paragraph (1)

The employer must have the operations supervisor of wood processing machines carry out the following matters:

事業者は、木材加工用機械作業主任者に、次の事項を行なわせなければならない。

Article 130, paragraph (1), item (i)

to directly supervise the work of handling wood processing machines;

木材加工用機械を取り扱う作業を直接指揮すること。

Article 130, paragraph (1), item (ii)

to inspect the wood processing machine and its safety device;

木材加工用機械及びその安全装置を点検すること。

Article 130, paragraph (1), item (iii)

to take immediately necessary measures when having found any abnormality in the wood processing machine and its safety device; and

木材加工用機械及びその安全装置に異常を認めたときは、直ちに必要な措置をとること。

Article 130, paragraph (1), item (iv)

to monitor the use of a jig or a tool during the operation.

作業中、治具、工具等の使用状況を監視すること。

Section 3-2 Machines for Food Processing第三節の二 食品加工用機械

Article 130-2第百三十条の二

Covers, etc. for Cutting Machines, etc.(切断機等の覆い等)
Article 130-2, paragraph (1)

The employer must provide covers, enclosures, etc. on the parts of the blade of a food processing cutting machine or food processing slicing machine other than the parts necessary for cutting or slicing.

事業者は、食品加工用切断機又は食品加工用切削機の刃の切断又は切削に必要な部分以外の部分には、覆い、囲い等を設けなければならない。

Article 130-3第百三十条の三

Prevention of Dangers When Feeding Raw Materials into Cutting Machines, etc.(切断機等に原材料を送給する場合における危険の防止)
Article 130-3, paragraph (1)

When feeding raw materials into the machine set forth in the preceding Article (excluding a machine constructed so that raw materials are fed automatically) and there is a risk of endangering workers, the employer must suspend the operation of the machine or have workers use tools, etc.

事業者は、前条の機械(原材料の送給が自動的に行われる構造のものを除く。)に原材料を送給する場合において、労働者に危険を及ぼすおそれのあるときは、当該機械の運転を停止し、又は労働者に用具等を使用させなければならない。

Article 130-3, paragraph (2)

A worker who has been ordered to use the tools, etc. referred to in the preceding paragraph must use them.

労働者は、前項の用具等の使用を命じられたときは、これを使用しなければならない。

Article 130-4第百三十条の四

Prevention of Dangers When Taking Out Raw Materials from Cutting Machines, etc.(切断機等から原材料を取り出す場合における危険の防止)
Article 130-4, paragraph (1)

When taking out raw materials from the machine set forth in Article 130-2 (excluding a machine constructed so that raw materials are taken out automatically) and there is a risk of endangering workers, the employer must suspend the operation of the machine or have workers use tools, etc.

事業者は、第百三十条の二の機械(原材料の取出しが自動的に行われる構造のものを除く。)から原材料を取り出す場合において、労働者に危険を及ぼすおそれのあるときは、当該機械の運転を停止し、又は労働者に用具等を使用させなければならない。

Article 130-4, paragraph (2)

A worker who has been ordered to use the tools, etc. referred to in the preceding paragraph must use them.

労働者は、前項の用具等の使用を命じられたときは、これを使用しなければならない。

Article 130-5第百三十条の五

Prevention of Dangers Due to Falling, etc. into Crushing Machines, etc.(粉砕機等への転落等における危険の防止)
Article 130-5, paragraph (1)

When there is a risk of endangering workers due to falling from an opening of a food processing crushing machine or food processing mixing machine, the employer must provide a lid, an enclosure, a railing with a height of 90 cm or more, etc.; provided, however, that this does not apply where it is difficult due to the nature of the work to provide a lid, an enclosure, a railing, etc., and the employer has taken measures to prevent the danger of falling, such as having workers use fall arrest equipment having performance suited to the risk of danger due to falling (hereinafter referred to as "fall arrest equipment with the required performance").

事業者は、食品加工用粉砕機又は食品加工用混合機の開口部から転落することにより労働者に危険が生ずるおそれのあるときは、蓋、囲い、高さが九十センチメートル以上の柵等を設けなければならない。ただし、蓋、囲い、柵等を設けることが作業の性質上困難な場合において、墜落による危険のおそれに応じた性能を有する墜落制止用器具(以下「要求性能墜落制止用器具」という。)を使用させる等転落の危険を防止するための措置を講じたときは、この限りでない。

Article 130-5, paragraph (2)

When there is a risk of endangering workers due to coming into contact with moving parts from the opening set forth in the preceding paragraph, the employer must provide a lid, an enclosure, etc.

事業者は、前項の開口部から可動部分に接触することにより労働者に危険が生ずるおそれのあるときは、蓋、囲い等を設けなければならない。

Article 130-5, paragraph (3)

A worker who, in the case referred to in the proviso to paragraph (1), has been ordered to use fall arrest equipment with the required performance or other lifelines (hereinafter referred to as "fall arrest equipment with the required performance, etc.") must use it.

労働者は、第一項ただし書の場合において、要求性能墜落制止用器具その他の命綱(以下「要求性能墜落制止用器具等」という。)の使用を命じられたときは、これを使用しなければならない。

Article 130-6第百三十条の六

Prevention of Dangers When Feeding Raw Materials into Crushing Machines, etc.(粉砕機等に原材料を送給する場合における危険の防止)
Article 130-6, paragraph (1)

When feeding raw materials into the machine set forth in paragraph (1) of the preceding Article (excluding a machine constructed so that raw materials are fed automatically) and there is a risk of endangering workers, the employer must suspend the operation of the machine or have workers use tools, etc.

事業者は、前条第一項の機械(原材料の送給が自動的に行われる構造のものを除く。)に原材料を送給する場合において、労働者に危険を及ぼすおそれのあるときは、当該機械の運転を停止し、又は労働者に用具等を使用させなければならない。

Article 130-6, paragraph (2)

A worker who has been ordered to use the tools, etc. referred to in the preceding paragraph must use them.

労働者は、前項の用具等の使用を命じられたときは、これを使用しなければならない。

Article 130-7第百三十条の七

Prevention of Dangers When Taking Out Contents from Crushing Machines, etc.(粉砕機等から内容物を取り出す場合における危険の防止)
Article 130-7, paragraph (1)

When taking out the contents from the machine set forth in Article 130-5, paragraph (1) (excluding a machine constructed so that the contents are taken out automatically), the employer must suspend the operation of the machine or have workers use tools, etc.

事業者は、第百三十条の五第一項の機械(内容物の取出しが自動的に行われる構造のものを除く。)から内容物を取り出すときは、当該機械の運転を停止し、又は労働者に用具等を使用させなければならない。

Article 130-7, paragraph (2)

A worker who has been ordered to use the tools, etc. referred to in the preceding paragraph must use them.

労働者は、前項の用具等の使用を命じられたときは、これを使用しなければならない。

Article 130-8第百三十条の八

Covers, etc. for Roll Machines(ロール機の覆い等)
Article 130-8, paragraph (1)

The employer must provide covers, enclosures, etc. on the parts of a food processing roll machine that are likely to endanger workers.

事業者は、食品加工用ロール機の労働者に危険を及ぼすおそれのある部分には、覆い、囲い等を設けなければならない。

Article 130-9第百三十条の九

Prevention of Dangers Due to Molding Machines, etc.(成形機等による危険の防止)
Article 130-9, paragraph (1)

When there is a risk of endangering a worker due to a part of the worker's body being caught in a food processing molding machine or food processing compression machine, or for other such reasons, the employer must provide covers, enclosures, etc.

事業者は、食品加工用成形機又は食品加工用圧縮機に労働者が身体の一部を挟まれること等により当該労働者に危険を及ぼすおそれのあるときは、覆い、囲い等を設けなければならない。

Section 4 Press Machine and Shearing Machine第四節 プレス機械及びシヤー

Article 131第百三十一条

Prevention of Dangers Due to Press Machines(プレス等による危険の防止)
Article 131, paragraph (1)

As regards a press machine and a shearing machine (hereinafter referred to as "press, etc."), the employer must take measures of providing a safety enclosure, etc., for preventing a part of a body of the worker carrying out the work using the press, etc., from going beyond the danger limit; provided, however, that this does not apply to press, etc., equipped with mechanism to prevent dangers due to the slide or the blade.

事業者は、プレス機械及びシヤー(以下「プレス等」という。)については、安全囲いを設ける等当該プレス等を用いて作業を行う労働者の身体の一部が危険限界に入らないような措置を講じなければならない。ただし、スライド又は刃物による危険を防止するための機構を有するプレス等については、この限りでない。

Article 131, paragraph (2)

When it is difficult to comply with the provisions of the preceding paragraph due to the nature of the work, the employer must take such necessary measures as installing safety devices (excluding hand-sweep safety devices) that conform to the requirements set forth in the following items, in order to secure the safety of a worker carrying out the work using the press, etc.:

事業者は、作業の性質上、前項の規定によることが困難なときは、当該プレス等を用いて作業を行う労働者の安全を確保するため、次に定めるところに適合する安全装置(手払い式安全装置を除く。)を取り付ける等必要な措置を講じなければならない。

Article 131, paragraph (2), item (i)

the safety device has the performance in accordance with the type of press, etc., pressure capability, strokes per minute, length of strokes, and the method of work; and

プレス等の種類、圧力能力、毎分ストローク数及びストローク長さ並びに作業の方法に応じた性能を有するものであること。

Article 131, paragraph (2), item (ii)

the safety device has the performance in accordance with the suspension performance of the press, etc., for a safety device with two-hand control system or with sensitive-response system.

両手操作式の安全装置及び感応式の安全装置にあつては、プレス等の停止性能に応じた性能を有するものであること。

Article 131, paragraph (2), item (iii)

in the case of a laser-type safety device for a press brake, the device has the performance of being able to make the slide speed of the press brake 10 mm per second or less and, when operating the slide at that speed, of operating the slide only while the operating part for operating the slide is being operated.

プレスブレーキ用レーザー式安全装置にあつては、プレスブレーキのスライドの速度を毎秒十ミリメートル以下とすることができ、かつ、当該速度でスライドを作動させるときはスライドを作動させるための操作部を操作している間のみスライドを作動させる性能を有するものであること。

Article 131, paragraph (3)

The measures set forth in the preceding two paragraphs, as regards press, etc., equipped with a processing stage changeover switch, an operation changeover switch or an operation station changeover switch or a safety device changeover switch, must be taken in any state in which the changeover switch has been switched.

前二項の措置は、行程の切替えスイツチ、操作の切替えスイツチ若しくは操作ステーシヨンの切替えスイツチ又は安全装置の切替えスイツチを備えるプレス等については、当該切替えスイツチが切り替えられたいかなる状態においても講じられているものでなければならない。

Article 131-2第百三十一条の二

Prevention of Dangers Due to Descent of a Slide(スライドの下降による危険の防止)
Article 131-2, paragraph (1)

When the work of fitting, removing or adjusting the dies of a power press is carried out, and when a part of the body of the worker engaging in the work goes beyond the danger limit, the employer must have the worker take such measures as using a safety block, etc., in order to prevent the worker from dangers due to unexpected descent of the slide.

事業者は、動力プレスの金型の取付け、取外し又は調整の作業を行う場合において、当該作業に従事する労働者の身体の一部が危険限界に入るときは、スライドが不意に下降することによる労働者の危険を防止するため、当該作業に従事する労働者に安全ブロツクを使用させる等の措置を講じさせなければならない。

Article 131-2, paragraph (2)

The worker engaging in the work set forth in the preceding paragraph must take measures of using a safety block, etc., set forth in the same paragraph.

前項の作業に従事する労働者は、同項の安全ブロツクを使用する等の措置を講じなければならない。

Article 131-3第百三十一条の三

Adjustment of a Die(金型の調整)
Article 131-3, paragraph (1)

When operating a slide for adjusting a die of a press machine, the employer must carry out the operations by inching for the press machine with an inching mechanism or by manually operating for a machine without an inching mechanism.

事業者は、プレス機械の金型の調整のためスライドを作動させるときは、寸動機構を有するものにあつては寸動により、寸動機構を有するもの以外のものにあつては手回しにより行わなければならない。

Article 132第百三十二条

Maintaining the Functions of Clutches, etc.(クラツチ等の機能の保持)
Article 132, paragraph (1)

The employer must maintain the functions of a clutch, a brake and other devices necessary for controlling the press, etc., in effective conditions at all times.

事業者は、プレス等のクラツチ、ブレーキその他制御のために必要な部分の機能を常に有効な状態に保持しなければならない。

Article 133第百三十三条

Appointment of an Operations Supervisor of Press Machines(プレス機械作業主任者の選任)
Article 133, paragraph (1)

As regards the work set forth in Article 6, item (vii) of the Order, the employer must appoint an operations supervisor of press machines from the persons who have completed the skill training course for operations supervisor of press machines.

事業者は、令第六条第七号の作業については、プレス機械作業主任者技能講習を修了した者のうちから、プレス機械作業主任者を選任しなければならない。

Article 134第百三十四条

Duties of the Operations Supervisor of Press Machines(プレス機械作業主任者の職務)
Article 134, paragraph (1)

The employer must have the operations supervisor of press machines carry out the following matters:

事業者は、プレス機械作業主任者に、次の事項を行なわせなければならない。

Article 134, paragraph (1), item (i)

to inspect the press machine and its safety device;

プレス機械及びその安全装置を点検すること。

Article 134, paragraph (1), item (ii)

to immediately take necessary measures when having found any abnormality in the press machine and its safety device;

プレス機械及びその安全装置に異常を認めたときは、直ちに必要な措置をとること。

Article 134, paragraph (1), item (iii)

To store the key when having equipped a press machine or its safety device with a changeover key switch; and

プレス機械及びその安全装置に切替えキースイツチを設けたときは、当該キーを保管すること。

Article 134, paragraph (1), item (iv)

to directly supervise the work of fitting, removing and adjusting a die.

金型の取付け、取りはずし及び調整の作業を直接指揮すること。

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy