Search

Search provisions, jump to a law or an article

1 article

Article 6Work Subject to Appoint an Operations Supervisor

第六条(作業主任者を選任すべき作業)

The operations designated by the Cabinet Order set forth in Article 14 of the Act are as follows:

法第十四条の政令で定める作業は、次のとおりとする。

operations in a pressurized chamber (limited to those carried out inside working chambers or shafts under a pressure exceeding atmospheric pressure using the caisson method or other pneumatic engineering method);

高圧室内作業(潜函工法その他の圧気工法により、大気圧を超える気圧下の作業室又はシヤフトの内部において行う作業に限る。)

welding, cutting or heating metals by using acetylene welding equipment or gas welding equipment using a manifold;

アセチレン溶接装置又はガス集合溶接装置を用いて行う金属の溶接、溶断又は加熱の作業

assembling, dismantling, altering or repairing the skyline logging cable crane (meaning the appliance comprising a yarder, cableway, carriage, supporting posts and other accessories, and hoisting raw woods or fuel woods, and carrying them in air by power driven system) or the logging cableway (meaning the appliance comprising a cableway, carriage, supporting posts and other accessories, and carrying raw woods or fire woods in air for the fixed zone) falling under any of the following categories, or the operations yarding or carrying by these appliances:

次のいずれかに該当する機械集材装置(集材機、架線、搬器、支柱及びこれらに附属する物により構成され、動力を用いて、原木又は薪炭材を巻き上げ、かつ、空中において運搬する設備をいう。)若しくは運材索道(架線、搬器、支柱及びこれらに附属する物により構成され、原木又は薪炭材を一定の区間空中において運搬する設備をいう。)の組立て、解体、変更若しくは修理の作業又はこれらの設備による集材若しくは運材の作業

those with a prime mover with a rated output exceeding 7.5 kW

原動機の定格出力が七・五キロワツトを超えるもの

those with the total slope distance of spans of 350 m or more

支間の斜距離の合計が三百五十メートル以上のもの

those having the maximum operating load of 200 kg or more

最大使用荷重が二百キログラム以上のもの

handling a boiler (excluding a small-sized boiler);

ボイラー(小型ボイラーを除く。)の取扱いの作業

operations pertaining to the radiation work listed in item (1) or (3) of Appended Table 2 (excluding the operations using medical X-ray generating apparatuses or X-ray generating apparatuses with rated voltage measured at its peak value of 1,000 kV or more (excluding those apparatuses listed in item (2) of the same Table 2, hereinafter referred to as "X-ray apparatuses"));

別表第二第一号又は第三号に掲げる放射線業務に係る作業(医療用又は波高値による定格管電圧が千キロボルト以上のエツクス線を発生させる装置(同表第二号の装置を除く。以下「エツクス線装置」という。)を使用するものを除く。)

carrying out radiography by using gamma-ray radiation apparatuses;

ガンマ線照射装置を用いて行う透過写真の撮影の作業

operations carried out by using woodworking machines (limited to the circular saw, band saw, planer, chamfering unit and router, excluding portable ones) at a workplace where 5 or more machines of that kind are installed (in case of including band saws with automatic carriage, 3 or more);

木材加工用機械(丸のこ盤、帯のこ盤、かんな盤、面取り盤及びルーターに限るものとし、携帯用のものを除く。)を五台以上(当該機械のうちに自動送材車式帯のこ盤が含まれている場合には、三台以上)有する事業場において行う当該機械による作業

operations carried out by using powered press machines at the workplace where 5 or more machines of that kind are installed;

動力により駆動されるプレス機械を五台以上有する事業場において行う当該機械による作業

heating and drying objects by using the equipment listed below:

次に掲げる設備による物の加熱乾燥の作業

industrial dryers (meaning drying chambers or dryers heating or drying substances other than the explosives prescribed in using a heat source; the same applies hereinafter) used for dangerous substances, etc. (meaning dangerous substances listed in Appended Table 1 and the substances to be dried from which these dangerous substances are generated) with an internal cubic volume of 1 m3 or more;

乾燥設備(熱源を用いてに規定する火薬類以外の物を加熱乾燥する乾燥室及び乾燥器をいう。以下同じ。)のうち、危険物等(別表第一に掲げる危険物及びこれらの危険物が発生する乾燥物をいう。)に係る設備で、内容積が一立方メートル以上のもの

industrial dryers used for substances other than the dangerous substances, etc. described in (a) using fuel as the heat source (limited to those having the maximum consuming amount of 10 kg/h or more for solid fuel, 10 liters/h or more for liquid fuel or 1 m3/h or more for gas fuel) or using electric power as the heat source (limited to those having rated consuming power of 10 kW or more).

乾燥設備のうち、イの危険物等以外の物に係る設備で、熱源として燃料を使用するもの(その最大消費量が、固体燃料にあつては毎時十キログラム以上、液体燃料にあつては毎時十リツトル以上、気体燃料にあつては毎時一立方メートル以上であるものに限る。)又は熱源として電力を使用するもの(定格消費電力が十キロワツト以上のものに限る。)

using a concrete breaker;

コンクリート破砕器を用いて行う破砕の作業

excavating the natural ground where the height of the excavating surface is 2 m or more (excluding the excavation work for tunnels and pits other than vertical pits, and the work listed in item (xi));

掘削面の高さが二メートル以上となる地山の掘削(ずい道及びたて坑以外の坑の掘削を除く。)の作業(第十一号に掲げる作業を除く。)

fitting or removing struts or waling of shoring;

土止め支保工の切りばり又は腹起こしの取付け又は取り外しの作業

excavating tunnels, etc. (meaning tunnels and pits other than vertical pits (excluding the pits for quarrying rocks prescribed in ), hereinafter the same, and excluding operations by using excavating machines without workers approaching the tunnel face) or associated muck loading, assembling tunnel shoring (meaning the shoring to prevent the rock falling or wall falling), fitting lock-bolts or spraying concrete, etc.;

ずい道等(ずい道及びたて坑以外の坑(に規定する岩石の採取のためのものを除く。)をいう。以下同じ。)の掘削の作業(掘削用機械を用いて行う掘削の作業のうち労働者が切羽に近接することなく行うものを除く。)又はこれに伴うずり積み、ずい道支保工(ずい道等における落盤、肌落ち等を防止するための支保工をいう。)の組立て、ロツクボルトの取付け若しくはコンクリート等の吹付けの作業

lining tunnels, etc. (meaning assembling, transporting or removing tunnel formwork supports (meaning temporary structures comprising formwork used in tunnel arch and wall concrete placements and supports, beams, ties, braces, etc. supporting formwork), or concrete placement associated with the assembly or transport);

ずい道等の覆工(ずい道型枠支保工(ずい道等におけるアーチコンクリート及び側壁コンクリートの打設に用いる型枠並びにこれを支持するための支柱、はり、つなぎ、筋かい等の部材により構成される仮設の設備をいう。)の組立て、移動若しくは解体又は当該組立て若しくは移動に伴うコンクリートの打設をいう。)の作業

excavating for quarrying rocks as prescribed in where the height of the excavating surface is 2 m or more;

掘削面の高さが二メートル以上となるに規定する岩石の採取のための掘削の作業

stacking or unstacking cargo (meaning aggregation of cargo (excluding bulk cargoes of wheat, soybeans, ore, etc.) piled up at a warehouse, shed or the ground) of 2 m in height or more (excluding work carried out solely by the operator of a loading machine);

高さが二メートル以上のはい(倉庫、上屋又は土場に積み重ねられた荷(小麦、大豆、鉱石等のばら物の荷を除く。)の集団をいう。)のはい付け又ははい崩しの作業(荷役機械の運転者のみによつて行われるものを除く。)

loading, unloading or transporting cargo on ships (excluding those carried out without using a ship lifting appliance on ships having gross tonnage of less than 500 tons (including, among ships whose gross tonnage has increased from less than 500 tons to 500 tons or more through the new construction, extension or enlargement of crew quarters (limited to those of less than 510 tons), those specified by Order of the Ministry of Health, Labour and Welfare));

船舶に荷を積み、船舶から荷を卸し、又は船舶において荷を移動させる作業(総トン数五百トン未満の船舶(船員室の新設、増設又は拡大により総トン数が五百トン未満から五百トン以上となつたもの(五百十トン未満のものに限る。)のうち厚生労働省令で定めるものを含む。)において揚貨装置を用いないで行うものを除く。)

assembling or dismantling the concrete formwork supports (meaning the temporary structures comprising supports, beams, ties, braces, etc. supporting formwork used in concrete placement of the slabs and girders, etc. of a structure; the same applies hereinafter);

型枠支保工(支柱、はり、つなぎ、筋かい等の部材により構成され、建設物におけるスラブ、桁等のコンクリートの打設に用いる型枠を支持する仮設の設備をいう。以下同じ。)の組立て又は解体の作業

assembling, dismantling or altering suspended scaffolding (excluding suspended scaffolding of gondolas; the same applies hereinafter), overhanging scaffolding or scaffolding of a height of 5 m or more;

つり足場(ゴンドラのつり足場を除く。以下同じ。)、張出し足場又は高さが五メートル以上の構造の足場の組立て、解体又は変更の作業

assembling, dismantling or altering the framework of a building or a tower comprising metal members (limited to those with a height of 5 m or more);

建築物の骨組み又は塔であつて、金属製の部材により構成されるもの(その高さが五メートル以上であるものに限る。)の組立て、解体又は変更の作業

installing, dismantling or altering the superstructure of a bridge comprising metal members (limited to those with a height of 5 m or more or the parts of the superstructure where the span of the bridge is 30 m or more);

橋梁の上部構造であつて、金属製の部材により構成されるもの(その高さが五メートル以上であるもの又は当該上部構造のうち橋梁の支間が三十メートル以上である部分に限る。)の架設、解体又は変更の作業

assembling the structural members of a wooden building whose eaves height prescribed in is 5 m or more, or installing roof base or exterior wall base accompanying such assembling;

に規定する軒の高さが五メートル以上の木造建築物の構造部材の組立て又はこれに伴う屋根下地若しくは外壁下地の取付けの作業

dismantling or demolishing a concrete structure (limited to those with a height of 5 m or more);

コンクリート造の工作物(その高さが五メートル以上であるものに限る。)の解体又は破壊の作業

installing or altering the concrete superstructure of a bridge (limited to those with a height of 5 m or more or the parts of the superstructure where the span of the bridge is 30 m or more);

橋梁の上部構造であつて、コンクリート造のもの(その高さが五メートル以上であるもの又は当該上部構造のうち橋梁の支間が三十メートル以上である部分に限る。)の架設又は変更の作業

handling class-1 pressure vessels (excluding small-sized pressure vessels and vessels listed below):

第一種圧力容器(小型圧力容器及び次に掲げる容器を除く。)の取扱いの作業

vessels listed in (a) of item (v) of Article 1, which have an internal cubic volume of 5 m3 or less;

第一条第五号イに掲げる容器で、内容積が五立方メートル以下のもの

vessels listed in (b) through (d) of item (v) of Article 1, which have an internal cubic volume of 1 m3 or less.

第一条第五号ロからニまでに掲げる容器で、内容積が一立方メートル以下のもの

manufacturing or handling the specified chemical substances listed in Appended Table 3 (excluding operations handling them for test and research, and operations specified by Order of the Ministry of Health, Labour and Welfare of manufacturing or handling the substances listed in 3-3, 11-2, 13-2, 15, 15-2, 18-2 through 18-4, 19-2 through 19-4, 22-2 through 22-5, 23-2, 33-2 or 34-3 of of that table, or the substances listed in 37 of that relate to 3-3, 11-2, 13-2, 15, 15-2, 18-2 through 18-4, 19-2 through 19-4, 22-2 through 22-5, 23-2, 33-2 or 34-3 of );

別表第三に掲げる特定化学物質を製造し、又は取り扱う作業(試験研究のため取り扱う作業及び同表3の3、11の2、13の2、15、15の2、18の2から18の4まで、19の2から19の4まで、22の2から22の5まで、23の2、33の2若しくは34の3に掲げる物又は37に掲げる物で3の3、11の2、13の2、15、15の2、18の2から18の4まで、19の2から19の4まで、22の2から22の5まで、23の2、33の2若しくは34の3に係るものを製造し、又は取り扱う作業で厚生労働省令で定めるものを除く。)

operations pertaining to the lead work listed in items (1) through (10) in Appended Table 4 (excluding those carried out by remote control in an isolated chamber);

別表第四第一号から第十号までに掲げる鉛業務(遠隔操作によつて行う隔離室におけるものを除く。)に係る作業

operations pertaining to the tetraalkyl lead, etc. work listed in items (1) through (6) or item (8) of Appended Table 5 (excluding those carried out by remote control in an isolated chamber, and limited to the work loading and unloading of drums and other containers for the work listed in item (6) of the same table);

別表第五第一号から第六号まで又は第八号に掲げる四アルキル鉛等業務(遠隔操作によつて行う隔離室におけるものを除くものとし、同表第六号に掲げる業務にあつては、ドラム缶その他の容器の積卸しの業務に限る。)に係る作業

operations carried out at places with an oxygen deficiency hazard, as listed in Appended Table 6;

別表第六に掲げる酸素欠乏危険場所における作業

operations prescribed by Order of the Ministry of Health, Labour and Welfare in connection with the manufacturing or handling of the organic solvents listed in Appended Table 6-2 (including the mixture of the organic solvent and other substances containing the organic solvent exceeding 5 % of the weight of the mixture; the same applies in item (x) of Article 21 and item (vi) of paragraph (1) of Article 22) at the indoor workshop, tank, hold, inside of pit or other places prescribed by Order of the Ministry of Health, Labour and Welfare;

屋内作業場又はタンク、船倉若しくは坑の内部その他の厚生労働省令で定める場所において別表第六の二に掲げる有機溶剤(当該有機溶剤と当該有機溶剤以外の物との混合物で、当該有機溶剤を当該混合物の重量の五パーセントを超えて含有するものを含む。第二十一条第十号及び第二十二条第一項第六号において同じ。)を製造し、又は取り扱う業務で、厚生労働省令で定めるものに係る作業

handling asbestos or preparations and other substances containing asbestos exceeding 0.1% of their weight (hereinafter referred to as "asbestos, etc.") (excluding operations handling them for test and research), or manufacturing asbestos, etc. for test and research, or manufacturing the asbestos listed in Article 16, paragraph (1), item (iv), (a) through (c) that is specified by Order of the Ministry of Health, Labour and Welfare in that item, or preparations and other substances containing such asbestos exceeding 0.1% of their weight (hereinafter referred to as "samples for asbestos analysis, etc.").

石綿若しくは石綿をその重量の〇・一パーセントを超えて含有する製剤その他の物(以下「石綿等」という。)を取り扱う作業(試験研究のため取り扱う作業を除く。)又は石綿等を試験研究のため製造する作業若しくは第十六条第一項第四号イからハまでに掲げる石綿で同号の厚生労働省令で定めるもの若しくはこれらの石綿をその重量の〇・一パーセントを超えて含有する製剤その他の物(以下「石綿分析用試料等」という。)を製造する作業

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy