Appended Table 9
別表第九（第五十三条の三関係）
| Machinery or other such equipment | Requirements | Required number of inspectors |
| Machinery or other such equipment set forth in item (i) of Appended Table 1 | (1) Among university or college of technology graduates with a specialization related to engineering, a person who has seven years or more of experience in designing, manufacturing or installing machinery or other such equipment for which a performance inspection is to be conducted, or two years or more of experience in inspecting the relevant machinery or other such equipment (hereinafter referred to as a "person with limited experience" in this table), must have completed a training course that meets all of the following requirements (this training course is limited to that related to the relevant machinery or other such equipment; hereinafter referred to as the "specified training" in this table) and that included 40 hours or more of theoretical training and 10 or more practice inspections. (i) Theoretical training shall cover the following subjects. (a) Structure, construction, installation and materials of the relevant machinery or other such equipment (b) Auxiliary equipment and accessories (c) Operation, cleaning and damage (d) Applicable laws and regulations, strength calculation methods and inspection standards (ii) Training shall be provided by a registered agency for performance inspections. (2) Among university or college of technology graduates with a specialization related to engineering, a person other than a person with limited experience must have completed specified training that included 80 hours or more of theoretical training and 200 or more practice inspections. (3) Among high school or secondary school graduates with a specialization related to engineering, a person who has ten years or more of experience in designing, manufacturing or installing machinery or other such equipment for which a performance inspection is to be conducted, or five years or more of experience in inspecting the relevant machinery or other such equipment (hereinafter referred to as a "person with extensive experience" in this table), must have completed the training course prescribed in item (1). (4) Among high school or secondary school graduates with a specialization related to engineering, a person other than a person with extensive experience must have completed specified training that included 80 hours or more of theoretical training and 400 or more practice inspections. (5) A person must have knowledge and experience equivalent to or greater than that of persons set forth in the preceding four items. | The number shall be calculated by dividing the annual number of performance inspections by 800 (any fraction shall be rounded up) |
| Machinery or other such equipment set forth in items (ii) and (iii) of Appended Table 1 | (1) Among university or college of technology graduates with a specialization related to engineering, a person with limited experience must have completed specified training that included 40 hours or more of theoretical training and 10 or more practice inspections. (2) Among university or college of technology graduates with a specialization related to engineering, a person other than a person with limited experience must have completed specified training that included 80 hours or more of theoretical training and 100 or more practice inspections. (3) Among high school or secondary school graduates with a specialization related to engineering, a person with extensive experience must have completed the training course prescribed in item (1). (4) Among high school or secondary school graduates with a specialization related to engineering, a person other than a person with extensive experience must have completed specified training that included 80 hours or more of theoretical training and 200 or more practice inspections. (5) A person must have knowledge and experience equivalent to or greater than that of persons set forth in the preceding four items. | The number shall be calculated by dividing the annual number of performance inspections by 800 (any fraction shall be rounded up) |
| Machinery or other such equipment set forth in item (iv) of Appended Table 1 | (1) Among university or college of technology graduates with a specialization related to engineering, a person with limited experience must have completed specified training that included 40 hours or more of theoretical training and 10 or more practice inspections. (2) Among university or college of technology graduates with a specialization related to engineering, a person other than a person with limited experience must have completed specified training that included 80 hours or more of theoretical training and 40 or more practice inspections. (3) Among high school or secondary school graduates with a specialization related to engineering, a person with extensive experience must have completed the training course prescribed in item (1). (4) Among high school or secondary school graduates with a specialization related to engineering, a person other than a person with extensive experience must have completed specified training that included 80 hours or more of theoretical training and 80 or more practice inspections. (5) A person must have knowledge and experience equivalent to or greater than that of persons set forth in the preceding four items. | The number shall be calculated by dividing the annual number of performance inspections by 800 (any fraction shall be rounded up) |
| Machinery or other such equipment set forth in item (v) of Appended Table 1 | (1) Among university or college of technology graduates with a specialization related to engineering, a person with limited experience must have completed specified training that included 40 hours or more of theoretical training and 10 or more practice inspections. (2) Among university or college of technology graduates with a specialization related to engineering, a person other than a person with limited experience must have completed specified training that included 80 hours or more of theoretical training and 30 or more practice inspections. (3) Among high school or secondary school graduates with a specialization related to engineering, a person with extensive experience must have completed the training course prescribed in item (1). (4) Among high school or secondary school graduates with a specialization related to engineering, a person other than a person with extensive experience must have completed specified training that included 80 hours or more of theoretical training and 60 or more practice inspections. (5) A person must have knowledge and experience equivalent to or greater than that of persons set forth in the preceding four items. | The number shall be calculated by dividing the annual number of performance inspections by 800 (any fraction shall be rounded up) |
| Machinery or other such equipment set forth in item (vi) of Appended Table 1 | (1) Among university or college of technology graduates with a specialization related to engineering, a person with limited experience must have completed specified training that included 40 hours or more of theoretical training and 10 or more practice inspections. (2) Among university or college of technology graduates with a specialization related to engineering, a person other than a person with limited experience must have completed specified training that included 80 hours or more of theoretical training and 20 or more practice inspections. (3) Among high school or secondary school graduates with a specialization related to engineering, a person with extensive experience must have completed the training course prescribed in item (1). (4) Among high school or secondary school graduates with a specialization related to engineering, a person other than a person with extensive experience must have completed specified training that included 80 hours or more of theoretical training and 40 or more practice inspections. (5) A person must have knowledge and experience equivalent to or greater than that of persons set forth in the preceding four items. | The number shall be calculated by dividing the annual number of performance inspections by 800 (any fraction shall be rounded up) |
| Machinery or other such equipment set forth in item (viii) of Appended Table 1 | (1) Among university or college of technology graduates with a specialization related to engineering, a person with limited experience must have completed specified training that included 40 hours or more of theoretical training and 10 or more practice inspections. (2) Among university or college of technology graduates with a specialization related to engineering, a person other than a person with limited experience must have completed specified training that included 80 hours or more of theoretical training and 10 or more practice inspections. (3) Among high school or secondary school graduates with a specialization related to engineering, a person with extensive experience must have completed the training course prescribed in item (1). (4) Among high school or secondary school graduates with a specialization related to engineering, a person other than a person with extensive experience must have completed specified training that included 80 hours or more of theoretical training and 20 or more practice inspections. (5) A person must have knowledge and experience equivalent to or greater than that of persons set forth in the preceding four items. | The number shall be calculated by dividing the annual number of performance inspections by 800 (any fraction shall be rounded up) |
| 機械等 | 条件 | 数 |
| 別表第一第一号に掲げる機械等 | 一 工学関係大学等卒業者のうち、七年以上性能検査を行おうとする機械等の設計、製作若しくは据付けの業務に従事した経験又は二年以上当該機械等の検査の業務に従事した経験を有する者（以下この表において「短期経験者」という。）で、次のいずれにも該当する研修（当該機械等に係るものに限る。以下この表において「特定研修」という。）であつて学科研修の時間が四十時間以上であり、かつ、検査実習が十件以上であるものを修了したものであること。 （一） 学科研修が、次に掲げる科目について行われるものであること。 （１） 当該機械等の構造、工作、据付け及び材料 （２） 附属装置及び附属品 （３） 取扱い、清掃作業及び損傷 （４） 関係法令、強度計算方法及び検査基準 （二） 登録性能検査機関が行うものであること。 二 工学関係大学等卒業者のうち、短期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が二百件以上であるものを修了したものであること。 三 工学関係高等学校等卒業者のうち、十年以上性能検査を行おうとする機械等の設計、製作若しくは据付けの業務に従事した経験又は五年以上当該機械等の検査の業務に従事した経験を有する者（以下この表において「長期経験者」という。）で、第一号に規定する研修を修了したものであること。 四 工学関係高等学校等卒業者のうち、長期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が四百件以上であるものを修了したものであること。 五 前各号に掲げる者と同等以上の知識経験を有する者であること。 | 年間の性能検査の件数を八百で除して得た数（端数があるときは、これを切り上げる。） |
| 別表第一第二号及び第三号に掲げる機械等 | 一 工学関係大学等卒業者のうち、短期経験者で、特定研修であつて学科研修の時間が四十時間以上であり、かつ、検査実習が十件以上であるものを修了したものであること。 二 工学関係大学等卒業者のうち、短期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が百件以上であるものを修了したものであること。 三 工学関係高等学校等卒業者のうち、長期経験者で、第一号に規定する研修を修了したものであること。 四 工学関係高等学校等卒業者のうち、長期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が二百件以上であるものを修了したものであること。 五 前各号に掲げる者と同等以上の知識経験を有する者であること。 | 年間の性能検査の件数を八百で除して得た数（端数があるときは、これを切り上げる。） |
| 別表第一第四号に掲げる機械等 | 一 工学関係大学等卒業者のうち、短期経験者で、特定研修であつて学科研修の時間が四十時間以上であり、かつ、検査実習が十件以上であるものを修了したものであること。 二 工学関係大学等卒業者のうち、短期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が四十件以上であるものを修了したものであること。 三 工学関係高等学校等卒業者のうち、長期経験者で、第一号に規定する研修を修了したものであること。 四 工学関係高等学校等卒業者のうち、長期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が八十件以上であるものを修了したものであること。 五 前各号に掲げる者と同等以上の知識経験を有する者であること。 | 年間の性能検査の件数を八百で除して得た数（端数があるときは、これを切り上げる。） |
| 別表第一第五号に掲げる機械等 | 一 工学関係大学等卒業者のうち、短期経験者で、特定研修であつて学科研修の時間が四十時間以上であり、かつ、検査実習が十件以上であるものを修了したものであること。 二 工学関係大学等卒業者のうち、短期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が三十件以上であるものを修了したものであること。 三 工学関係高等学校等卒業者のうち、長期経験者で、第一号に規定する研修を修了したものであること。 四 工学関係高等学校等卒業者のうち、長期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が六十件以上であるものを修了したものであること。 五 前各号に掲げる者と同等以上の知識経験を有する者であること。 | 年間の性能検査の件数を八百で除して得た数（端数があるときは、これを切り上げる。） |
| 別表第一第六号に掲げる機械等 | 一 工学関係大学等卒業者のうち、短期経験者で、特定研修であつて学科研修の時間が四十時間以上であり、かつ、検査実習が十件以上であるものを修了したものであること。 二 工学関係大学等卒業者のうち、短期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が二十件以上であるものを修了したものであること。 三 工学関係高等学校等卒業者のうち、長期経験者で、第一号に規定する研修を修了したものであること。 四 工学関係高等学校等卒業者のうち、長期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が四十件以上であるものを修了したものであること。 五 前各号に掲げる者と同等以上の知識経験を有する者であること。 | 年間の性能検査の件数を八百で除して得た数（端数があるときは、これを切り上げる。） |
| 別表第一第八号に掲げる機械等 | 一 工学関係大学等卒業者のうち、短期経験者で、特定研修であつて学科研修の時間が四十時間以上であり、かつ、検査実習が十件以上であるものを修了したものであること。 二 工学関係大学等卒業者のうち、短期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が十件以上であるものを修了したものであること。 三 工学関係高等学校等卒業者のうち、長期経験者で、第一号に規定する研修を修了したものであること。 四 工学関係高等学校等卒業者のうち、長期経験者以外のもので、特定研修であつて学科研修の時間が八十時間以上であり、かつ、検査実習が二十件以上であるものを修了したものであること。 五 前各号に掲げる者と同等以上の知識経験を有する者であること。 | 年間の性能検査の件数を八百で除して得た数（端数があるときは、これを切り上げる。） |
This names a provision as it read when this amending Act was made. It may have been amended since, so today's text can say something else. That is why it is not a link.This names a law that is not in this collection, so there is nothing here to open.We could not tell which provision this names, so it is not a link.