Appended Table 4-2
別表第四の二（第四十六条関係）
| Machinery or other such equipment for which a design review is to be conducted | Machinery or other such equipment for which training is conducted | Requirements |
| Machinery or other such equipment set forth in Appended Table 1, item (i) or (ii) | Machinery or other such equipment set forth in Appended Table 1, items (i) and (ii) | (1) Theoretical training shall cover the following subjects. (a) Structure of specified machinery or other such equipment (b) Materials and testing methods (c) Construction and testing methods (d) Auxiliary equipment and accessories (e) Applicable laws and regulations, strength calculation methods and inspection standards (2) Training shall be provided by a registered agency for design reviews and post-manufacturing inspections. |
| Machinery or other such equipment set forth in Appended Table 1, item (iii) or (v) | Machinery or other such equipment set forth in Appended Table 1, items (iii) and (v) | |
| Machinery or other such equipment set forth in Appended Table 1, item (iv) | Machinery or other such equipment set forth in Appended Table 1, item (iv) | |
| Machinery or other such equipment set forth in Appended Table 1, item (vi) or (vii) | Machinery or other such equipment set forth in Appended Table 1, items (vi) and (vii) | |
| Machinery or other such equipment set forth in Appended Table 1, item (viii) | Machinery or other such equipment set forth in Appended Table 1, item (viii) |
| 設計審査を行おうとする機械等 | 研修を行う機械等 | 要件 |
| 別表第一第一号又は第二号に掲げる機械等 | 別表第一第一号及び第二号に掲げる機械等 | （１） 学科研修が、次に掲げる科目について行われるものであること。 イ 特定機械等の構造 ロ 材料及び試験方法 ハ 工作及び試験方法 ニ 附属装置及び附属品 ホ 関係法令、強度計算方法及び検査基準 （２） 登録設計審査等機関が行うものであること。 |
| 別表第一第三号又は第五号に掲げる機械等 | 別表第一第三号及び第五号に掲げる機械等 | |
| 別表第一第四号に掲げる機械等 | 別表第一第四号に掲げる機械等 | |
| 別表第一第六号又は第七号に掲げる機械等 | 別表第一第六号及び第七号に掲げる機械等 | |
| 別表第一第八号に掲げる機械等 | 別表第一第八号に掲げる機械等 |
Requirements
条件
A graduate of a university or technical college under the School Education Act who completed an engineering course (including a person who has completed the course in the first half of a program at a professional university; hereinafter referred to as a "university or college of technology graduate with a specialization related to engineering") and who has completed training which meets all of the requirements set forth in the lower column of the following table pertaining to the machinery or other such equipment for which training is conducted set forth in the middle column of that table, corresponding to the category of machinery or other such equipment for which a design review is to be conducted set forth in the upper column of that table, and which includes 160 hours or more of theoretical training and one or more practice design reviews
A graduate of a high school or secondary school under the School Education Act who completed an engineering course (hereinafter referred to as a "high school or secondary school graduate with a specialization related to engineering") and who has completed training which meets all of the requirements set forth in the lower column of the table in (a) pertaining to the machinery or other such equipment for which training is conducted set forth in the middle column of that table, corresponding to the category of machinery or other such equipment for which a design review is to be conducted set forth in the upper column of that table, and which includes 210 hours or more of theoretical training and three or more practice design reviews
A person with knowledge and experience of at least the same level as a person as set forth in (a) or (b).
イ又はロに掲げる者と同等以上の知識経験を有する者であること。
Required number: The number shall be calculated by dividing the annual number of design reviews by 50 (any fraction shall be rounded up)
数 年間の設計審査の件数を五十で除して得た数（端数があるときは、これを切り上げる。）