# 労働安全衛生規則 / Ordinance on Industrial Safety and Health — 第百五十条 (Article 150)

This is the Markdown twin of https://japanlaw.org/ja/industrial-safety-and-health-ordinance/art-150. Every law, and how to address a provision: https://japanlaw.org/llms.txt. The same laws as MCP tools (no sign-in): https://japanlaw.org/mcp.

- Law: 労働安全衛生規則 (Ordinance on Industrial Safety and Health), 昭和四十七年労働省令第三十二号
- English title "Ordinance on Industrial Safety and Health": Ministry of Justice translation
- Kind: MinisterialOrdinance — the distinction between 法律 (Act), 政令 (Cabinet Order), 省令 (Ministerial Order) and 条例 (local ordinance) decides who may issue it and what it may say.
- Provision: 第百五十条 (Article 150)（回転軸の非破壊検査） — address `art-150`
- Text in force since: 2026-10-01
- URL (the page that opens at this provision): https://japanlaw.org/ja/industrial-safety-and-health-ordinance/art-150
- e-Gov law ID: 347M50002000032 — never renamed. A permanent link, `/l/{lawId}/{address}` on this site, redirects to the page.
- Every provision below carries its address and its URL on the line under it.
- Japanese text: e-Gov 法令検索, Digital Agency (デジタル庁). English: as marked on each line below.

Only the Japanese as published by the government has legal effect; the text
below is a copy of it. Every English rendering below is a translation and
says which kind: the Ministry of Justice's translation, or this
site's machine translation, whose model and date the Sources list names.
They are never merged and never substituted for one another.

---

### 第百五十条（回転軸の非破壊検査） — (Non-Destructive Inspection of the Rotating Shaft)
<sup>caption: Ministry of Justice translation — Japanese Law Translation Database System</sup>
<sup>art-150 · https://japanlaw.org/ja/industrial-safety-and-health-ordinance/art-150</sup>

    **第一項**  事業者は、高速回転体（回転軸の重量が一トンをこえ、かつ、回転軸の周速度が毎秒百二十メートルをこえるものに限る。）の回転試験を行なうときは、あらかじめ、その回転軸について、材質、形状等に応じた種類の非破壊検査を行ない、破壊の原因となるおそれのある欠陥のないことを確認しなければならない。
    <sup>art-150/par-1 · https://japanlaw.org/ja/industrial-safety-and-health-ordinance/art-150/par-1</sup>
    When carrying out a rotating test of a high-speed rotor (limited to one whose rotating shaft weighs more than 1 ton and whose rotating shaft has a circumferential speed exceeding 120 m/sec.), the employer must in advance carry out, on its rotating shaft, non-destructive inspection of a type suited to the material, shape, etc., and confirm that there is no defect that has a risk of causing destruction.
    <sup>machine translation, not official</sup>

## Cited by

2 provisions cite this one. No official source publishes this direction.

- 労働安全衛生規則 第百四十九条第一項（回転試験中の危険防止） — https://japanlaw.org/ja/industrial-safety-and-health-ordinance/art-149/par-1
- 労働安全衛生規則 第百五十条の二第一項（回転試験の実施方法） — https://japanlaw.org/ja/industrial-safety-and-health-ordinance/art-150-2/par-1

---

## Sources

- e-Gov 法令検索, Digital Agency (デジタル庁) — 労働安全衛生規則 — the text in force from 2026-10-01 (https://laws.e-gov.go.jp/law/347M50002000032/20261001_508M60000100116), retrieved 2026-11-13
- Japanese Law Translation Database System, Ministry of Justice (法務省) — Ordinance on Industrial Safety and Health — Ministry of Justice translation (https://www.japaneselawtranslation.go.jp/en/laws/view/3878/tb), retrieved 2026-11-13
- claude-sonnet-5-5 — Machine translation, batch industrial-safety-and-health-ordinance-20261113T030819-021, translated 2026-11-13
- This site's parser, version 240 — 労働安全衛生規則 — structure, counts, cross-references and defined terms, computed 2026-11-13
