# Article 648, paragraph (1), its wordings — Ordinance on Industrial Safety and Health

This is the Markdown twin of https://japanlaw.org/en/industrial-safety-and-health-ordinance/history/art-648/par-1. Every law, and how to address a provision: https://japanlaw.org/llms.txt. The same laws as MCP tools (no sign-in): https://japanlaw.org/mcp.

How the wording of Article 648, paragraph (1) (第六百四十八条第一項) changed with each amendment, and how it will change.

- Law: Ordinance on Industrial Safety and Health (労働安全衛生規則) — https://japanlaw.org/en/industrial-safety-and-health-ordinance
- Provision: Article 648, paragraph (1) (第六百四十八条第一項) — https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-648/par-1 (as Markdown: https://japanlaw.org/md/en/industrial-safety-and-health-ordinance/art-648/par-1)
- The law's amendments: https://japanlaw.org/en/industrial-safety-and-health-ordinance/amendments
- 2 wordings, oldest first.

## 1. Before Ministry of Health, Labour and Welfare Order No. 29 of 2026

- State: In force

Japanese:

> 注文者は、法第三十一条第一項の場合において、請負人に係る作業従事者に交流アーク溶接機（自動溶接機を除く。）を使用させるときは、当該交流アーク溶接機に、法第四十二条の規定に基づき厚生労働大臣が定める規格に適合する交流アーク溶接機用自動電撃防止装置を備えなければならない。ただし、次の場所以外の場所において使用させるときは、この限りでない。

English (Machine translation, not official):

> In the case set forth in Article 31, paragraph (1) of the Act, when the orderer has persons engaged in work pertaining to the contractor use alternating current arc welding equipment (excluding automatic welding equipment), the orderer must provide the alternating current arc welding equipment with an automatic voltage reducing device which complies with the standards provided by the Minister of Health, Labour and Welfare pursuant to the provisions of Article 42 of the Act; provided, however, that this does not apply when the equipment is used at places other than the following places:

## 2. 1 April 2027 — Ministry of Health, Labour and Welfare Order No. 29 of 2026

- State: Not yet in force
- Takes effect: 1 April 2027
- The amendment: Reworded (Ministry of Health, Labour and Welfare Order No. 29 of 2026) — https://japanlaw.org/en/industrial-safety-and-health-ordinance/amendments/20270401_508M60000100029

Japanese:

> 注文者は、法第三十一条第一項の場合において、請負人に係る作業従事者に交流アーク溶接機（自動溶接機を除く。）を使用させるときは、当該交流アーク溶接機に、法第四十二条第一項の規定に基づき厚生労働大臣が定める規格に適合する交流アーク溶接機用自動電撃防止装置を備えなければならない。ただし、次の場所以外の場所において使用させるときは、この限りでない。

English (Machine translation, not official):

> In the case set forth in Article 31, paragraph (1) of the Act, when the orderer has persons engaged in work pertaining to the contractor use alternating current arc welding equipment (excluding automatic welding equipment), the orderer must provide the alternating current arc welding equipment with an automatic voltage reducing device which complies with the standards provided by the Minister of Health, Labour and Welfare pursuant to the provisions of Article 42, paragraph (1) of the Act; provided, however, that this does not apply when the equipment is used at places other than the following places:

---

## Sources

- The dates and the amending laws: e-Gov (Digital Agency) (https://laws.e-gov.go.jp/law/347M50002000032)
- English name of the law: Japanese Law Translation, Ministry of Justice (https://www.japaneselawtranslation.go.jp/en/laws/view/3878/tb)
- English titles of the amending laws: Written for this site with AI
- The Japanese text before: e-Gov (Digital Agency) (https://laws.e-gov.go.jp/law/347M50002000032/20270401_507M60000100012)
- The Japanese text after: e-Gov (Digital Agency) (https://laws.e-gov.go.jp/law/347M50002000032/20270401_508M60000100029)
