# 労働安全衛生規則 / Ordinance on Industrial Safety and Health — 第三百五十六条 (Article 356)

This is the Markdown twin of https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356. Every law, and how to address a provision: https://japanlaw.org/llms.txt. The same laws as MCP tools (no sign-in): https://japanlaw.org/mcp.

- Law: 労働安全衛生規則 (Ordinance on Industrial Safety and Health), 昭和四十七年労働省令第三十二号
- English title "Ordinance on Industrial Safety and Health": Ministry of Justice translation
- Kind: MinisterialOrdinance — the distinction between 法律 (Act), 政令 (Cabinet Order), 省令 (Ministerial Order) and 条例 (local ordinance) decides who may issue it and what it may say.
- Provision: 第三百五十六条 (Article 356)（掘削面のこう配の基準） — address `art-356`
- Text in force since: 2026-10-01
- URL (the page that opens at this provision): https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356
- e-Gov law ID: 347M50002000032 — never renamed. A permanent link, `/l/{lawId}/{address}` on this site, redirects to the page.
- Every provision below carries its address and its URL on the line under it.
- Japanese text: e-Gov 法令検索, Digital Agency (デジタル庁). English: as marked on each line below.

Only the Japanese as published by the government has legal effect; the text
below is a copy of it. Every English rendering below is a translation and
says which kind: the Ministry of Justice's translation, or this
site's machine translation, whose model and date the Sources list names.
They are never merged and never substituted for one another.

---

### 第三百五十六条（掘削面のこう配の基準） — (Standard for Gradient of the Excavation Surface)
<sup>caption: Ministry of Justice translation — Japanese Law Translation Database System</sup>
<sup>art-356 · https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356</sup>

      **第一項**  事業者は、手掘り（パワー・シヨベル、トラクター・シヨベル等の掘削機械を用いないで行なう掘削の方法をいう。以下次条において同じ。）により地山（崩壊又は岩石の落下の原因となるき裂がない岩盤からなる地山、砂からなる地山及び発破等により崩壊しやすい状態になつている地山を除く。以下この条において同じ。）の掘削の作業を行なうときは、掘削面（掘削面に奥行きが二メートル以上の水平な段があるときは、当該段により区切られるそれぞれの掘削面をいう。以下同じ。）のこう配を、次の表の上欄に掲げる地山の種類及び同表の中欄に掲げる掘削面の高さに応じ、それぞれ同表の下欄に掲げる値以下としなければならない。
地山の種類	掘削面の高さ（単位　メートル）	掘削面のこう配（単位　度）
岩盤又は堅い粘土からなる地山	五未満	九十
五以上	七十五
その他の地山	二未満	九十
二以上五未満	七十五
五以上	六十
      <sup>art-356/par-1 · https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356/par-1</sup>
      When carrying out excavating work of natural ground (excluding natural ground composed of rock beds without cracks that cause collapse or fall of rocks, natural ground composed of sand, and natural ground in a condition which is liable to collapse due to blasting etc.; hereinafter the same applies in this Article) by the method of manual excavation (meaning the method of excavation without using excavating machines such as a power shovel and tractor shovel; hereinafter the same applies in the following Article), the employer must make the gradient of the excavation surface (in the case that there is a horizontal step with a depth of 2 m or more on the excavation surface, meaning each excavation surface divided by the horizontal step; the same applies hereinafter) the value equal to or less than that listed in the right column of the following Table in accordance with the type of the ground listed in the left column and the height of the excavation surface listed in the middle column of the same Table, respectively:
Type of the Natural Ground	Height of the Excavation Surface (Unit: m)	Gradient of the Excavation Surface (Unit: Degrees)
natural ground composed of rock beds or hard clay	Less than 5	90
5 or more	75
other natural ground	Less than 2	90
2 or more and less than 5	75
5 or more	60
      <sup>Ministry of Justice translation — Japanese Law Translation Database System</sup>

      **第二項**  前項の場合において、掘削面に傾斜の異なる部分があるため、そのこう配が算定できないときは、当該掘削面について、同項の基準に従い、それよりも崩壊の危険が大きくないように当該各部分の傾斜を保持しなければならない。
      <sup>art-356/par-2 · https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356/par-2</sup>
      In the case referred to in the preceding paragraph, when it is not possible to calculate the gradient because there are parts of the excavation surface that differ in slope from other parts, the slopes of the part of the excavation surface must be maintained so that the danger of collapse may not become greater than that prescribed in the same paragraph.
      <sup>Ministry of Justice translation — Japanese Law Translation Database System</sup>

---

## Cites
- art-356/par-1: 次条 → 労働安全衛生規則 第三百五十七条 (Article 357), art-357 — https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-357
- art-356/par-1: この条 → 労働安全衛生規則 第三百五十六条 (Article 356), art-356 — https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356
- art-356/par-2: 前項 → 労働安全衛生規則 第三百五十六条第一項 (Article 356, paragraph (1)), art-356/par-1 — https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356/par-1

## Cited by

3 provisions cite this one. No official source publishes this direction.

- 労働安全衛生規則 第三百五十六条第一項（掘削面のこう配の基準） — https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356/par-1
- 労働安全衛生規則 第三百五十六条第二項（掘削面のこう配の基準） — https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-356/par-2
- 労働安全衛生規則 第三百五十七条第二項 — https://japanlaw.org/en/industrial-safety-and-health-ordinance/art-357/par-2

---

## Sources

- e-Gov 法令検索, Digital Agency (デジタル庁) — 労働安全衛生規則 — the text in force from 2026-10-01 (https://laws.e-gov.go.jp/law/347M50002000032/20261001_508M60000100116), retrieved 2026-11-13
- Japanese Law Translation Database System, Ministry of Justice (法務省) — Ordinance on Industrial Safety and Health — Ministry of Justice translation (https://www.japaneselawtranslation.go.jp/en/laws/view/3878/tb), retrieved 2026-11-13
- This site's parser, version 240 — 労働安全衛生規則 — structure, counts, cross-references and defined terms, computed 2026-11-13
